Solution to Tool Swept Volume of Multi-axis Milling Simulation

被引：0
|
作者：
Yu Tianbiao [1 ]
Zhang Xuewei [1 ]
Liu Wenwen [1 ]
Dai Yuanxing [1 ]
Li Queping [2 ]
机构：
[1] Northeastern Univ, Sch Mech & Automat, Shenyang, Peoples R China
[2] Shenyang Blower Works Group Corp, Shenyang, Peoples R China
来源：
PROCEEDINGS OF THE 2013 THE INTERNATIONAL CONFERENCE ON EDUCATION TECHNOLOGY AND INFORMATION SYSTEM (ICETIS 2013) | 2013年 / 65卷
关键词：
multi-axis milling; cutter swept volume; enveloping characteristic line; general cutter model;
D O I：
暂无
中图分类号：
G40 [教育学];
学科分类号：
040101 ; 120403 ;
摘要：
The tool swept volume has been generally applied in multi-axis NC machining simulation and verification. For the characteristic and actual condition, a general cutter model was built, and based on that a new method to simulate the tool swept volume of multi-axis milling was represented. The geometric model of cutter is translated to tool sphere with Guass Mapping, and the tangency function of tool vector was obtained. Combining the tool sphere and tangent function above, the enveloping characteristic line of tool could be acquired. Then the tool swept volume model was built. This paper also solves the self intersection of tool swept volume. Finally the simulation model verifies the validity of this method.
引用
收藏
页码：649 / 652
页数：4
相关论文
共 50 条
  • [1] MULTI-AXIS CNC MILLING SIMULATION AND EXPERIMENTS OF A ZIRCONIA DENTURE
    Cao, Y.
    Cao, S.
    Cao, H.
    Tan, Y.
    Bai, Y.
    [J]. BASIC & CLINICAL PHARMACOLOGY & TOXICOLOGY, 2016, 118 : 49 - 49
  • [2] Tool Orientation Angle Optimization for a Multi-Axis Robotic Milling System
    da Silva, Leandro Batista
    Yoshioka, Hayato
    Shinno, Hidenori
    Zhu, Jiang
    [J]. INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, 2019, 13 (05) : 574 - 582
  • [3] Modeling and on-line simulation of surface topography considering tool wear in multi-axis milling process
    Zhang, Chen
    Zhang, Haiyan
    Li, Yingguang
    Zhou, Laishui
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (1-4): : 735 - 749
  • [4] Modeling and on-line simulation of surface topography considering tool wear in multi-axis milling process
    Chen Zhang
    Haiyan Zhang
    Yingguang Li
    Laishui Zhou
    [J]. The International Journal of Advanced Manufacturing Technology, 2015, 77 : 735 - 749
  • [5] Real-time measurement of milling tool behavior in multi-axis machine tool
    Mizugaki, Y
    Hao, M
    Asao, T
    Terai, H
    [J]. 1998 JAPAN-U.S.A. SYMPOSIUM ON FLEXIBLE AUTOMATION - PROCEEDINGS, VOLS I AND II, 1998, : 791 - 798
  • [6] 5 Axis Milling Simulation using a Swept Volume via Gauss Map
    Lee, Seok Won
    Nestler, Andreas
    [J]. WSCG 2008, COMMUNICATION PAPERS, 2008, : 269 - 276
  • [7] Machining chatter simulation in multi-axis milling using graphical method
    Khachan, S.
    Ismail, F.
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (02): : 163 - 170
  • [8] Three-dimensional tool radius compensation for multi-axis peripheral milling
    Youdong Chen
    Tianmiao Wang
    [J]. Chinese Journal of Mechanical Engineering, 2013, 26 : 547 - 554
  • [9] Three-dimensional Tool Radius Compensation for Multi-axis Peripheral Milling
    CHEN Youdong
    WANG Tianmiao
    [J]. Chinese Journal of Mechanical Engineering, 2013, 26 (03) - 554
  • [10] Three-dimensional Tool Radius Compensation for Multi-axis Peripheral Milling
    CHEN Youdong
    WANG Tianmiao
    [J]. Chinese Journal of Mechanical Engineering, 2013, (03) : 547 - 554
12345