Cyclic response of monopile-supported offshore wind turbines under wind and wave loading in sand

Monopiles are popular solutions as the foundation to support offshore wind turbines (OWTs), which suffer from various amplitudes of continuous lateral cyclic wind and wave loading. The accumulation of tilt and change of the natural frequency of OWTs under cyclic loading have become crucial issues for OWT design. Hence the monopile-tower-soil system was established at the small-scale level based on similarity laws with a suit of constant-amplitude and multi-amplitude tests in dense sand. Two sets of gear-driving assembly were successfully set up to achieve the application of cyclic loading to the model OWT. The amplitude and symmetry of cyclic loading were specified as three indicative regions according to those of real wind farms. On the basis of test results, the two-way loading was found to be the most hazardous situation and the preloading condition led to a high accumulation of tilt. The change of natural frequency was controlled by the load magnitude and tended to increase during cyclic loads, while a sharp decrease was observed when sand subsidence was generated. The post-cyclic lateral capacity seemed to be a slight increase compared with the static capacity. The relevant analyses based on test results can provide practical recommendations for OWT design.