Large strain deformation and ultra-fine grained materials by machining

被引：54
|
作者：
Swarninathan, S
Shankar, MR
Lee, S
Hwang, J
King, AH [1 ]
Kezar, RF
Rao, BC
Brown, TL
Chandrasekar, S
Compton, WD
Trumble, KP
机构：
[1] Purdue Univ, Sch Ind Engn, W Lafayette, IN 47907 USA
[2] Purdue Univ, Sch Mat Engn, W Lafayette, IN 47907 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 410卷
关键词：
deformation; machining; nanostructured materials;
D O I：
10.1016/j.msea.2005.08.139
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Characteristics of the deformation fields associated with chip formation in plane strain machining are described. The ability to impose very large strain deformation in a controlled manner is highlighted. The creation of nano- and ultra-fine grained structures by machining is demonstrated in a variety of metals and alloys. These results indicate that machining not only offers a simple method for large scale manufacturing of nanostructured materials, but also provides a unique experimental configuration for studying large strain deformation phenomena. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：358 / 363
页数：6
相关论文
共 50 条
  • [1] Formation of ultra-fine grained materials by machining and the characteristics of the deformation fields
    Deng, W. J.
    Xia, W.
    Li, C.
    Tang, Y.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (09) : 4521 - 4526
  • [2] Large plastic deformation and ultra-fine grained structures generated by machining
    Deng, Wenjun
    Xia, Wei
    Li, Yong
    Wan, Zhenping
    Tang, Yong
    [J]. ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 : 21 - 25
  • [3] Continuous and ultra-fine grained chip production with large strain machining
    Kanani, M.
    Sohrabi, S.
    Ebrahimi, R.
    Paydar, M. H.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (08) : 1777 - 1786
  • [4] Effect of Machining Parameters on Microstructure and Hardness of Ultra-fine Grained Material Created by Large Strain Machining
    Wu, C. L.
    Ye, B. Y.
    Deng, W. J.
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL II: MODERN DESIGN THEORY AND METHODOLOGY, MEMS AND NANOTECHNOLOGY, AND MATERIAL SCIENCE AND TECHNOLOGY IN MANUFACTURING, 2009, 628-629 : 387 - 392
  • [5] Deformation mechanics associated with formation of ultra-fine grained chips in machining
    Sevier, M
    Lee, S
    Shankar, MR
    Yang, HTY
    Chandrasekar, S
    Compton, WD
    [J]. NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 2006, 503-504 : 379 - 384
  • [6] Large scale manufacturing of ultra-fine grained materials
    Swaminathan, S
    Brown, TL
    Shankar, MR
    Rao, BC
    Trumble, KP
    Compton, WD
    Chandrasekar, S
    [J]. ULTRAFINE GRAINED MATERIALS III, 2004, : 161 - 166
  • [7] Effects of Machining Velocity on Ultra-Fine Grained Al 7075 Alloy Produced by Cryogenic Temperature Large Strain Extrusion Machining
    Yin, Xiaolong
    Chen, Haitao
    Deng, Wenjun
    [J]. MATERIALS, 2019, 12 (10):
  • [8] Deformation mechanisms in an ultra-fine grained Al alloy
    Sabirov, Ilchat
    Barnett, Matthew R.
    Estrin, Yuri
    Timokhina, Ilana
    Hodgson, Peter D.
    [J]. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2009, 100 (12) : 1679 - 1685
  • [9] Deformation twinning in ultra-fine grained Ni at room temperature and low strain rate
    Shu, B. P.
    Liu, L.
    Shen, B.
    Hu, W. B.
    [J]. MATERIALS LETTERS, 2013, 91 : 268 - 271
  • [10] Effect of strain on “hardening by annealing and softening by deformation” phenomena in ultra-fine grained aluminum
    Daisuke Terada
    Hironobu Houda
    Nobuhiro Tsuji
    [J]. Journal of Materials Science, 2008, 43 : 7331 - 7337
12345