The Fiberboard of Hot Pressing Process Optimization and Combination Performance Characterization

被引：0
|
作者：
Guo, Minghui [1 ]
Hu, Jianpeng [1 ]
机构：
[1] NE Forestry Univ, Minist Educ, Key Lab Biobased Mat Sci & Technol, Harbin 150040, Peoples R China
来源：
FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4 | 2011年 / 44-47卷
关键词：
ammonium lignosulfonate/urea; hot-pressing process; characterization of performance; FTIR; XRD; ESEM;
D O I：
10.4028/www.scientific.net/AMM.44-47.2278
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To pack a certain quality ratio ammonium lignosulfonate / urea as a filler into the natural wood fiber, Using flat pressure process fiberboard materials, Optimize the hot pressing technique that the filler is 20% (The quality ratio of lignosulfonate/ urea is 5: 3), slab moisture content is 13%, hot-pressing temperature is 190 degrees C; hot-pressing time is 7 minutes, hot-pressing pressure is 2MPa and 1% paraffin emulsion. Verifying test results show that mechanical performance is stable and reliable process. Analyze the reactivity of fiberboard packing, fiber gathered, the microstructure of interface properties with the application of FTIR, XRD and ESEM and other modern instrument analysis technology.
引用
收藏
页码：2278 / 2282
页数：5
相关论文
共 50 条
  • [1] Impact of Hot Pressing Temperature on Medium Density Fiberboard (MDF) Performance
    Gul, W.
    Khan, A.
    Shakoor, A.
    [J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017
  • [2] Modeling and simulation of the hot-pressing process in the production of medium density fiberboard (MDF)
    Carvalho, LMH
    Costa, CAV
    [J]. CHEMICAL ENGINEERING COMMUNICATIONS, 1998, 170 : 1 - 21
  • [3] Medium Density Fiberboard Continuous Hot-Pressing Process Based on Intelligent DSC
    Zhou, Yugang
    Zhu, Liangkuan
    Wang, Zibo
    [J]. PROCEEDINGS OF 2018 10TH INTERNATIONAL CONFERENCE ON MODELLING, IDENTIFICATION AND CONTROL (ICMIC), 2018,
  • [4] OPTIMIZATION OF THE THERMAL CONDITIONS OF THE HOT-PRESSING PROCESS
    BUCHNEV, LM
    SMYSLOV, AI
    DMITRIEV, IA
    [J]. SOVIET POWDER METALLURGY AND METAL CERAMICS, 1986, 25 (10): : 817 - 820
  • [5] Effect of Hot-pressing Factors on Binderless Fiberboard Properties
    Xie, Lisheng
    Liu, Jiaquan
    Du, Anlei
    [J]. 2012 INTERNATIONAL CONFERENCE ON BIOBASE MATERIAL SCIENCE AND ENGINEERING (BMSE), 2012, : 8 - 11
  • [6] Fuzzy control of medium density fiberboard hot-pressing
    Cao, Jun
    Zhang, Xiumei
    Liu, Yaqiu
    [J]. ICIEA 2007: 2ND IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-4, PROCEEDINGS, 2007, : 2045 - 2048
  • [7] Hot-pressing process optimization by response surface methodology
    Park, BD
    Riedl, B
    Hsu, EW
    Shields, J
    [J]. FOREST PRODUCTS JOURNAL, 1999, 49 (05) : 62 - 68
  • [8] Heat Transfer Hot-Pressing Model of Medium Density Fiberboard
    Li, Hongpeng
    Wang, Xingjian
    Zhang, Chunrui
    [J]. MATERIALS RESEARCH AND APPLICATIONS, PTS 1-3, 2014, 875-877 : 1083 - 1086
  • [9] Optimization and Experiment on Process Parameters of Hot Pressing Bonding of Seaweed Sheet
    Chen, Kunjie
    He, Xinye
    Qi, Hengyang
    Yang, Haoyong
    Yu, Haiming
    [J]. Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2023, 54 (04): : 407 - 415
  • [10] Repetitious-Hot-Pressing Technique in Hot-Pressing Process
    Shixue SONG
    [J]. Journal of Materials Science & Technology, 2003, (05) : 486 - 488
12345