Experimental investigations of vibration and acoustics signals in milling process using kapok oil as cutting fluid

Vegetable oils are found as the feasible alternative for conventional minerals oils. There has been many environmental and health issues which are spotted with the use of conventional cutting fluids. There has been a great demand for developing new environmentally friendly vegetable based cutting fluids to reduce these harmful effects. In this present study, vegetable based kapok oil is used as a cutting fluid during milling to study its consequences over other conventional oils. The process parameters such as spindle speed, depth of cut and feed rate were optimized with respect to the flank wear (V-b) and surface roughness (R-a) respectively with the use of central composite design in response surface methodology (RSM). Further an attempt has been made to monitor the tool condition by measuring the cutting force, vibration and sound pressure simultaneously. Three different tool conditions such as dull, fresh and working were analyzed and their consequences were also reported. Also, the performance of the kapok oil is compared with the palm oil and mineral oil (SAE 20W 40). The feed rate has the major contribution for surface roughness and flank wear. It is found that the cutting force (F), sound pressure (p) and vibration (V) increases with the tool wear.