In-situ measurements of temperature distribution during transmission laser welding of poly(aryletherketone)

被引：2
|
作者：
Villar, M. [1 ]
Garnier, C. [2 ]
Chabert, F. [1 ]
Nassiet, V. [1 ]
Diez, J. C. [3 ]
Sotelo, A. [3 ]
Madre, M. A. [3 ]
机构：
[1] Univ Toulouse, LGP ENIT INPT, Interfaces & Funct Mat, Tarbes, France
[2] Univ Toulouse, LGP ENIT INPT, Mech Mat Struct & Proc, Tarbes, France
[3] Univ Zaragoza, CSIC, Inst Mat Sci Aragon, E-50009 Zaragoza, Spain
来源：
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) | 2016年 / 1769卷
关键词：
D O I：
10.1063/1.4963408
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, the temperature distribution inside the specimens has been measured during transmission laser welding. The material studied is a high performance thermoplastic of the polyaryletherketone (PAEK) family. The assembly consists of a quasi-amorphous sample as the upper part and a semi-crystalline sample as the lower part. The temperature fields were measured by infrared thermography with the camera sensor perpendicular to the welded interface. With an energy beam of 28 J.mm(-2) and irradiation time of 15s, we have noticed that the maximum temperature inside the sample is kept far from the PAEK degradation one. Moreover, the temperature at the interface reaches the melting temperature thus assuring enough mobility for polymeric chains to get adhesion at the interface. Finally, the location and size of the heat-affected zone (HAZ) has been determined.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] In-situ infrared thermography measurements to master transmission laser welding process parameters of PEKK
    Villar, M.
    Garnier, C.
    Chabert, F.
    Nassiet, V.
    Samelor, D.
    Diez, J. C.
    Sotelo, A.
    Madre, M. A.
    OPTICS AND LASERS IN ENGINEERING, 2018, 106 : 94 - 104
  • [2] In-Situ process monitoring during laser transmission welding of PA6-GF30
    Schmailzl, Anton
    Quandt, Benjamin
    Schmidt, Michael
    Hierl, Stefan
    10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES [LANE 2018], 2018, 74 : 524 - 527
  • [3] Temperature measurements during laser skin welding
    Fried, NM
    Choi, B
    Welch, AJ
    Walsh, JT
    LASERS IN SURGERY: ADVANCED CHARACTERIZATION, THERAPEUTICS, AND SYSTEMS IX, PROCEEDINGS OF, 1999, 3590 : 120 - 127
  • [4] In-situ temperature measurement using monochrome high-speed sensors during laser welding
    2013, Japan Welding Society (31):
  • [5] Temperature dependence of melt duration during excimer laser crystallization using in-situ optical measurements
    Kuo, Chil-Chyuan
    Yeh, Wen-Chang
    Lee, Ji-Feng
    Jeng, Jeng-Ywan
    LASERS IN ENGINEERING, 2007, 17 (1-2) : 45 - 57
  • [6] Temperature dependence of melt duration during excimer laser crystallization using in-situ optical measurements
    Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan
    不详
    不详
    Lasers Eng., 2007, 1-2 (45-57):
  • [7] In situ laser-induced breakdown spectroscopy measurements during laser welding of superalloy
    Lednev, V. N.
    Sdvizhenskii, P. A.
    Grishin, M. Ya
    Stavertiy, A. Ya
    Tretyakov, R. S.
    Asyutin, R. D.
    Fedorov, A. N.
    Pershin, S. M.
    APPLIED OPTICS, 2021, 60 (05) : 1144 - 1149
  • [8] In-situ measurement of weld quality during MAG welding using laser ultrasonic
    Otaki S.
    Matsuida T.
    Nomura K.
    Imura F.
    Kita R.
    Asai S.
    Welding International, 2019, 33 (10-12) : 450 - 459
  • [9] In-situ measurement of weld quality during MAG welding using laser ultrasonic
    Otaki, Satoshi
    Matsuida, Taketo
    Nomura, Kazufumi
    Imura, Fumiya
    Kita, Ryosuke
    Asai, Satoru
    2020, Japan Welding Society (38): : 11 - 18
  • [10] In-situ resistance measurements during pulsed laser deposition of ultrathin films
    Hong Kong Univ of Science and, Technology, Clearwater Bay, Hong Kong
    Applied Surface Science, 1996, 106 : 51 - 54
12345