Solution Processing Dependent Bulk Heterojunction Nanomorphology of P3HT/PCBM Thin Films

被引:23
|
作者
Munshi, Joydeep [1 ]
Dulal, Rabindra [2 ]
Chien, TeYu [2 ]
Chen, Wei [3 ]
Balasubramanian, Ganesh [1 ]
机构
[1] Lehigh Univ, Dept Mech Engn & Mech, Bethlehem, PA 18015 USA
[2] Univ Wyoming, Dept Phys & Astron, Laramie, WY 82071 USA
[3] Northwestern Univ, Dept Mech Engn, Evanston, IL 60208 USA
基金
美国国家科学基金会;
关键词
organic solar cell; P3HT/PCBM; coarse grain molecular dynamics; X-ray diffraction; small angle X-ray scattering (SAXS); ORGANIC SOLAR-CELLS; COARSE-GRAINED MODELS; POLYMER-FULLERENE; RECOMBINATION DYNAMICS; PHASE-SEPARATION; HYBRID POLYMER; SMALL-ANGLE; MORPHOLOGY; SOLVENT; PCBM;
D O I
10.1021/acsami.9b02719
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Mixtures of poly(3-hexyl-thiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) have been widely employed as donor and acceptor materials, respectively, for the active layer of the bulk heterojunction (BHJ) organic solar cells. Experiments are able to provide only limited insights on the dynamics of blend morphology of these organic materials because of the challenges in extracting microstructural characterization amidst the poor contrast in electron microscopy. We present results from coarse-grained molecular dynamics simulations (CGMD) describing the morphological evolution of P3HT/PCBM active layer under solution processing in chlorobenzene (CB). We examine the impact of various processing parameters such as weight ratio, degree of polymerization (DOP), thermal annealing, and preheating on the BHJ active layers using morphological characterizations from atomic trajectories. Simulated diffraction patterns are compared with experimental results of X-ray diffraction and Small Angle X-ray Scattering (SAXS). Both simulated scattering and experimental X-ray diffraction and X-ray scattering measurements reveal increase in crystallinity for P3HT upon annealing until PCBM weight fraction similar to 50%. The solubility of PCBM being greater in CB than that of P3HT facilitates the phase separation of the polymer during early stages of solvent evaporation. An increase in the average size of the P3HT domain relative to the preannealed morphology, is due to phase segregation and crystallization of the polymer upon annealing. Percolation for PCBM remains unchanged until PCBM constitutes at least one-half of the composition. Although 1.0:2.0 weight ratio is predicted to be ideal for balanced charge transport, 1.0:1.0 weight ratio is the most beneficial of overall power conversion based on exciton generation and charge separation at the interface. DOP of P3HT molecules is another important design variable as larger P3HT molecules tend to entangle more often deteriorating molecular order of P3HT phase in the active layer. Preheating the ternary mixture of P3HT, PCBM, and CB modifies the structural order and morphology of the BHJ due to changes in PCBM diffusion into the P3HT phase.
引用
收藏
页码:17056 / 17067
页数:12
相关论文
共 50 条
  • [1] Photoluminescence of P3HT:PCBM bulk heterojunction thin films and effect of external electric field
    Narra, Sudhakar
    Tsai, Shuo-En
    Awasthi, Kamlesh
    Rana, Shailesh
    Diau, Eric Wei-Guang
    Ohta, Nobuhiro
    [J]. JOURNAL OF THE CHINESE CHEMICAL SOCIETY, 2022, 69 (01) : 140 - 151
  • [2] Machine learned metaheuristic optimization of the bulk heterojunction morphology in P3HT:PCBM thin films
    Munshi, Joydeep
    Chen, Wei
    Chien, TeYu
    Balasubrarnanian, Ganesh
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2021, 187 (187)
  • [3] Electrodes for GaOHPc:PCBM/P3HT:PCBM bulk heterojunction solar cell
    Kaulachs, I.
    Muzikante, I.
    Gerca, L.
    Shlihta, G.
    Shipkovs, P.
    Grehovs, V.
    Kalnachs, J.
    Roze, M.
    Rozite, G.
    Ivanova, A.
    [J]. CHEMICAL PHYSICS, 2012, 405 : 46 - 51
  • [4] The Fabrication of Bulk Heterojunction P3HT: PCBM Organic Photovoltaics
    Darwis, D.
    Sesa, E.
    Farhamza, D.
    Iqbal
    [J]. 5TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCES AND TECHNOLOGY (ICAMST 2017), 2018, 367
  • [5] The formation of crystalline P3HT fibrils upon annealing of a PCBM:P3HT bulk heterojunction
    Savenije, Tom J.
    Kroeze, Jessica E.
    Yang, Xiaoniu
    Loos, Joachim
    [J]. THIN SOLID FILMS, 2006, 511 : 2 - 6
  • [6] Quantitative Analysis of the Molecular Dynamics of P3HT:PCBM Bulk Heterojunction
    Guilbert, Anne A. Y.
    Zbiri, Mohamed
    Dunbar, Alan D. F.
    Nelson, Jenny
    [J]. JOURNAL OF PHYSICAL CHEMISTRY B, 2017, 121 (38): : 9073 - 9080
  • [7] Bulk and contact resistance in P3HT:PCBM heterojunction solar cells
    Shen, Yang
    Li, Kejia
    Majumdar, Nabanita
    Campbell, Joe C.
    Gupta, Mool C.
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 (08) : 2314 - 2317
  • [8] Photoinduced carrier generation in P3HT/PCBM bulk heterojunction materials
    Hwang, In-Wook
    Moses, Daniel
    Heeger, Alan J.
    [J]. JOURNAL OF PHYSICAL CHEMISTRY C, 2008, 112 (11): : 4350 - 4354
  • [9] Solution Aging Effects on the Performance and Morphology of P3HT: PCBM Bulk Heterojunction Solar Cells
    Yu, Fei
    Kuppa, Vikram K.
    [J]. NANO LIFE, 2015, 5 (04)
  • [10] Surface photovoltage in PCBM/P3HT bulk heterojunction photovoltaic cells
    Osterloh, Frank E.
    Holmes, Michael A.
    Zhao, Jing
    Chang, Lilian
    Dittrich, Th
    Moule, Adam J.
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2013, 245