Effect of Rare Earth Ce on the Microstructure and Mechanical Properties of 34CrNiMo6 Steel for Wind Turbine Main Shaft

被引:0
|
作者
Ge, Yanming [1 ]
Wang, Kehong [1 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mat Sci & Engn, Nanjing 210094, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
D O I
10.1155/2019/8135253
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of rare earth Ce on mechanical properties is studied by investigating the precipitates evolution during heat treatment of 34CrNiMo6 steel. Five different rare earth Ce contents are carried out with the same holding time 3hours. Then, the mechanical properties of 34CrNiMo6 steel are obtained under steady state conditions and impact conditions, respectively. The strength decreases while the elongation after breakage increases with the rare earth Ce content increasing. The impact absorbing energy at 20 degrees C and -40 degrees C increases with the rare earth Ce content increasing. Based on the experimental results, the recommended rare earth Ce content is 0.05 wt.%. The differences in mechanical properties among the different rare earth Ce contents may be the nucleation rate and growth of precipitates under different conditions. The spherification degree of cementite is more complete with rare earth Ce content, resulting in the decrease of mechanical properties and improvement of ductility.
引用
收藏
页数:9
相关论文
共 50 条
  • [1] Influence of Microalloying Element on the Microstructure and Mechanical Properties of 34CrNiMo6 Steel for Wind Turbine Main Shaft
    Ge, Yanming
    Wang, Kehong
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
  • [2] Effect of various heat treatments on microstructure and mechanical properties of 34CrNiMo6 steel
    Abd El-Azim, Mohammad E.
    Ghoneim, Mohammad M.
    Nasreldin, Aly M.
    Soliman, Salah
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1997, 88 (06): : 502 - 507
  • [3] Effect of Various Heat Treatments on Microstructure and Mechanical Properties of 34CrNiMo6 Steel
    Abd El-Azim, Mohammad E.
    Ghoneim, Mohammad M.
    Nasreldin, Aly M.
    Soliman, Salah
    International Journal of Materials Research, 1997, 88 (06): : 502 - 507
  • [4] Effect of various heat treatments on microstructure and mechanical properties of 34CrNiMo6 steel
    AbdElAzim, ME
    Ghoneim, MM
    Nasreldin, AM
    Soliman, S
    ZEITSCHRIFT FUR METALLKUNDE, 1997, 88 (06): : 502 - 507
  • [5] Microstructure and mechanical properties of 34CrNiMo6 steel repaired by laser remelting
    Liang, Renyu
    Huang, Chunping
    Hao, Hongwei
    Liu, Fenggang
    Liu, Fencheng
    Song, Menghua
    Ke, Liming
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06): : 13870 - 13878
  • [6] Microstructure and Mechanical Properties of 34CrNiMo6 Steel Repaired by Friction Stir Processing
    Wu, Zhongwen
    Huang, Chunping
    Liu, Fencheng
    Xia, Chun
    Ke, Liming
    MATERIALS, 2019, 12 (02):
  • [7] Effect of heat treatment on microstructure and mechanical properties of 34CrNiMo6 steel by laser solid forming
    Shi, Shang
    Huang, Chunping
    Liu, Fenggang
    Chen, Wenjing
    Liu, Fencheng
    Xia, Chun
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 78 : 308 - 318
  • [8] EFFECT OF TEMPERING TEMPERATURE ON PRECIPITATE EVOLUTION AND MECHANICAL PROPERTIES OF 34CrNiMo6 STEEL
    Ge, Yanming
    Wang, Kehong
    MATERIALI IN TEHNOLOGIJE, 2019, 53 (04): : 527 - 534
  • [9] DEVELOPMENT OF BANDED MICROSTRUCTURE IN 34CrNiMo6 STEEL
    Nagode, A.
    Resnik, A.
    Bizjak, M.
    Kosec, G.
    Karpe, B.
    Budak, I.
    Kosec, B.
    Zorc, B.
    METALURGIJA, 2016, 55 (03): : 329 - 332
  • [10] Microstructure and Tribological Properties of Laser Forming Repaired 34CrNiMo6 Steel
    Huang, Chunping
    Lin, Xin
    Yang, Haiou
    Liu, Fencheng
    Huang, Weidong
    MATERIALS, 2018, 11 (09)