ANALYSIS OF THE QUENCHING AND PARTITIONING (Q&P) PROCESS WITH PARTIAL AUSTENITISATION IN A LOW-CARBON STEEL BY PHASE FIELD MODELLING

被引：0
|
作者：
Santofimia, M. J. [1 ,2 ]
Takahama, Y. [2 ,3 ]
Zhao, L. [1 ,2 ]
Sietsma, J. [2 ]
机构：
[1] Mat Innovat Inst M2I, Mekelweg 2, NL-2628 CD Delft, Netherlands
[2] Delft Univ Technol, Dept Mat Sci & Engn, NL-2628 CD Delft, Netherlands
[3] Nippon Steel Corp Ltd, Chiyoda Ku, Tokyo 1008071, Japan
来源：
NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRENGTH STEELS: BUENOS AIRES 2008, VOLS 1 AND 2, PROCEEDINGS, | 2008年
关键词：
Quenching and Partitioning; Phase Field Modelling; Steels;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The phase field model is used to simulate the Quenching and Partitioning (Q&P) process, including partial austenitisation, in a low carbon steel containing 1.1 wt.% aluminium. The initial microstructure, prior to the partial austenitisation, has been used as input for the model. Calculations have shown the formation of epitaxial ferrite during cooling, which was also experimentally observed, and a grain size dependence of the carbon enrichment of the austenite. Simulations have shown an Interface migration during the partitioning step, leading to changes in the volume fraction of austenite that depends on the quenching temperature used.
引用
收藏
页码：777 / +
页数：3
相关论文
共 50 条
  • [1] Phase field simulation of the carbon redistribution during the quenching and partitioning process in a low-carbon steel
    Takahama, Y.
    Santofimia, M. J.
    Mecozzi, M. G.
    Zhao, L.
    Sietsma, J.
    ACTA MATERIALIA, 2012, 60 (6-7) : 2916 - 2926
  • [2] Dynamics of the Quenching and Partitioning (Q&P) Process
    Bigg, Timothy D.
    Matlock, David K.
    Speer, John G.
    Edmonds, David V.
    SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, 2011, 172-174 : 827 - +
  • [3] Quenching above martensite start temperature in quenching and partitioning (Q&P) steel through control of partial phase transformation
    Li, Y. J.
    Liu, D.
    Zhang, W. N.
    Kang, J.
    Chen, D.
    Yuan, G.
    Wang, G. D.
    MATERIALS LETTERS, 2018, 230 : 36 - 39
  • [4] Analysis of interface migration and isothermal martensite formation for quenching and partitioning process in a low-carbon steel by phase field modeling
    Zhang, Xing
    Shen, Gang
    Li, Chuanwei
    Gu, Jianfeng
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2019, 27 (07)
  • [5] Quenching and Partitioning (Q&P) Steel: Alloy Design, Phase Transformation and Evolution of Microstructure
    Kumar, Sachin
    Singh, Shiv Brat
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (08): : 3134 - 3156
  • [6] Quenching and Partitioning (Q&P) Steel: Alloy Design, Phase Transformation and Evolution of Microstructure
    Sachin Kumar
    Shiv Brat Singh
    Metallurgical and Materials Transactions A, 2023, 54 : 3134 - 3156
  • [7] Application of the Quenching and Partitioning (Q&P) Process to D6AC Steel
    Kang, Singon
    Kim, Kibum
    Son, Young-Il
    Lee, Seok-Jae
    ISIJ INTERNATIONAL, 2016, 56 (11) : 2057 - 2061
  • [8] An alternative quenching and partitioning (Q&P) process via spheroidization
    Kumar, Sachin
    Samanta, Santigopal
    Singh, Shiv Brat
    MATERIALS CHARACTERIZATION, 2022, 191
  • [9] Influence of Silicon Contents on the Microstructure and Tensile Properties of Quenching and Partitioning (Q&P) Processed Low Carbon Steel
    Yu, Chang Jae
    Seo, Chang-Hyo
    Im, Young-Roc
    Suh, Dong-Woo
    ISIJ INTERNATIONAL, 2024, 64 (02) : 412 - 420
  • [10] Influence of Silicon Contents on the Microstructure and Tensile Properties of Quenching and Partitioning (Q&P) Processed Low Carbon Steel
    Yu, Chang Jae
    Seo, Chang-Hyo
    Im, Young-Roc
    Suh, Dong-Woo
    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2024, 110 (16): : 1264 - 1274
12345