Optimization of turning parameters for surface roughness and tool life based on the Taguchi method

被引:113
|
作者
Hascalik, Ahmet [1 ]
Caydas, Ulas [1 ]
机构
[1] Firat Univ, Tech Educ Fac, Dept Mfg, TR-23119 Elazig, Turkey
关键词
surface roughness; tool life; Taguchi method; analysis of variance; Ti-6Al-4V;
D O I
10.1007/s00170-007-1147-0
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
In this study, the effect and optimization of machining parameters on surface roughness and tool life in a turning operation was investigated by using the Taguchi method. The experimental studies were conducted under varying cutting speeds, feed rates, and depths of cut. An orthogonal array, the signal-to-noise (S/N) ratio, and the analysis of variance (ANOVA) were employed to the study the performance characteristics in the turning of commercial Ti-6Al-4V alloy using CNMG 120408-883 insert cutting tools. The conclusions revealed that the feed rate and cutting speed were the most influential factors on the surface roughness and tool life, respectively. The surface roughness was chiefly related to the cutting speed, whereas the axial depth of cut had the greatest effect on tool life.
引用
收藏
页码:896 / 903
页数:8
相关论文
共 50 条
  • [1] Optimization of turning parameters for surface roughness and tool life based on the Taguchi method
    Hasçalik, Ahmet
    Çaydas, Ulas
    [J]. International Journal of Advanced Manufacturing Technology, 2008, 38 (9-10): : 896 - 903
  • [2] Optimization of turning parameters for surface roughness and tool life based on the Taguchi method
    Ahmet Hasçalık
    Ulaş Çaydaş
    [J]. The International Journal of Advanced Manufacturing Technology, 2008, 38 : 896 - 903
  • [3] Optimization Of Turning Parameters On Surface Roughness Based On Taguchi Technique
    Sahithi, V. V. D.
    Malayadrib, T.
    Srilatha, N.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 3657 - 3666
  • [4] Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning
    Nalbant, M.
    Gokkaya, H.
    Sur, G.
    [J]. MATERIALS & DESIGN, 2007, 28 (04) : 1379 - 1385
  • [5] Optimization of Tool Life, Surface Roughness and Production Time in CNC Turning Process Using Taguchi Method and ANOVA
    Rathod N.J.
    Chopra M.K.
    Chaurasiya P.K.
    Vidhate U.S.
    [J]. Annals of Data Science, 2023, 10 (05) : 1179 - 1197
  • [6] Surface Roughness Optimization of Some Machining Parameters in Turning Operations using Taguchi Method
    Dagwa, I. M.
    [J]. ADVANCES IN MATERIALS AND SYSTEMS TECHNOLOGIES II, 2009, 62-64 : 613 - 620
  • [7] Optimization with Taguchi Method of Influences on Surface Roughness of Cutting Parameters in CNC Turning Processing
    Ozdemir, Mustafa
    [J]. MECHANIKA, 2019, 25 (05): : 397 - 405
  • [8] OPTIMIZATION OF HARD TURNING PROCESS PARAMETERS WITH PCBN TOOL BASED ON THE TAGUCHI METHOD
    Puh, Franko
    Segota, Toni
    Jurkovic, Zoran
    [J]. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2012, 19 (02): : 415 - 419
  • [9] Optimization of hard turning process parameters with PCBN tool based on the Taguchi method
    Optimizacija parametara procesa tvrdog tokarenja PCBN alatnim pločicama temeljem Taguchijeve metode
    [J]. Puh, F. (franko.puh@uljanik.hr), 1600, Strojarski Facultet (19):
  • [10] OPTIMIZATION OF THE PROCESS PARAMETERS FOR SURFACE ROUGHNESS AND TOOL LIFE IN FACE MILLING USING THE TAGUCHI ANALYSIS
    Sarikaya, Murat
    Dilipak, Hakan
    Gezgin, Akin
    [J]. MATERIALI IN TEHNOLOGIJE, 2015, 49 (01): : 139 - 147