Contact forces and mechanisms in a vibratory finisher

被引：71
|
作者：
Yabuki, A
Baghbanan, MR
Spelt, JK
机构：
[1] Hiroshima Univ, Grad Sch Engn, Higashihiroshima 7398527, Japan
[2] Univ Toronto, Dept Mech & Ind Engn, Toronto, ON M5S 3G8, Canada
来源：
WEAR | 2002年 / 252卷 / 7-8期
基金：
加拿大自然科学与工程研究理事会;
关键词：
vibratory finishing; vibrating bed; mass finishing; contact force; friction coefficient; impact;
D O I：
10.1016/S0043-1648(02)00016-9
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The normal and tangential contact forces in a vibratory finishing machine were measured using a newly developed force sensor. A video system was used to record the motion of the finishing media as it collided with the test surface. Media contact occurred in three different modes. The ratio of the normal and tangential forces was compared with the measured friction coefficient under dry and water-wet conditions. This confirmed that media sliding occurred under water-wet conditions. (C) 2002 Published by Elsevier Science B.V.
引用
收藏
页码：635 / 643
页数：9
相关论文
共 50 条
  • [1] Measurements of wall-media contact forces and work in a vibratory finisher
    Maciel, Lucas Silva
    Spelt, Jan K.
    POWDER TECHNOLOGY, 2020, 360 : 911 - 920
  • [2] Comparison of DEM predictions and measured wall-media contact forces and work in a vibratory finisher
    Maciel, Lucas da Silva
    Spelt, Jan K.
    POWDER TECHNOLOGY, 2020, 366 : 434 - 447
  • [3] CONTACT FORCES IN UNGUIDED VIBRATORY FINISHING
    Brocker, Richard
    Vits, Frederik
    Mattfeld, Patrick
    Klocke, Fritz
    PROCEEDINGS OF THE ASME 10TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2015, VOL 1, 2015,
  • [4] Bulk mass flow in a vibratory finisher: mechanisms and effect of process parameters
    Lucas da Silva Maciel
    Jan K. Spelt
    Granular Matter, 2018, 20
  • [5] Bulk mass flow in a vibratory finisher: mechanisms and effect of process parameters
    Maciel, Lucas da Silva
    Spelt, Jan K.
    GRANULAR MATTER, 2018, 20 (03)
  • [6] Modeling of the Vibratory Tube Finisher Container
    Zanevskyy, Ihor
    Zanevska, Lyudmyla
    SMART AND SUSTAINABLE MANUFACTURING SYSTEMS, 2020, 4 (01): : 49 - 61
  • [7] Impact velocity measurement of media in a vibratory finisher
    Ciampini, D.
    Papini, M.
    Spelt, J. K.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 183 (2-3) : 347 - 357
  • [8] Influence of process parameters on average particle speeds in a vibratory finisher
    Lucas da Silva Maciel
    Jan K. Spelt
    Granular Matter, 2018, 20
  • [9] Influence of process parameters on average particle speeds in a vibratory finisher
    Maciel, Lucas da Silva
    Spelt, Jan K.
    GRANULAR MATTER, 2018, 20 (04)
  • [10] Characterization of dominant mechanisms in contact interface restoring forces
    Jalali, H.
    Ahmadian, H.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2012, 65 (01) : 75 - 82
12345