Effect of copper on the localized corrosion resistance of Ni-Ti shape memory alloy

被引：58

作者：

Rondelli, G ^{[1
]}

Vicentini, B ^{[1
]}

机构：

[1] CNR, TEMPE, I-20125 Milan, Italy

来源：

BIOMATERIALS | 2002年 / 23卷 / 03期

关键词：

Ni-Ti-Cu alloy; localized corrosion tests; passive films; martensitic transformation;

D O I：

10.1016/S0142-9612(01)00142-9

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

An electrochemical study aiming at the evaluation of corrosion parameters using potentiodynamic and potentiostatic techniques ("scratch" and modified ASTM F746) was conducted in 0.9% NaCl on wires from equiatomic Ni-Ti and ternary Ni44Ti51Cu5 superelastic alloys with Ti90Mo10 as a reference material. The results obtained using potentiostatic tests. that Simulate better the behavior of material in service conditions than potentiodynamic ones, indicate that both Ni-Ti and Ni-Ti-Cu wires exhibit low corrosion potentials (approximate to 50-150 mV versus SCE) inferior to that of Ti-Mo alloy. The latter proved to be immune to localized corrosion attacks up to 800 mV. (C) 2001 Elsevier Science Ltd. All rights reserved.

引用

页码：639 / 644

页数：6

共 50 条

[1] Effect of compressive straining on corrosion resistance of a shape memory Ni-Ti alloy in ringer's solution
MonteroOcampo, C
Lopez, H
Rodriguez, AS
[J]. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1996, 32 (04): : 583 - 591
[2] MECHANISM OF SHAPE MEMORY EFFECT IN NI-TI ALLOY
MOHAMED, HA
WASHBURN, J
[J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1976, 7 (07): : 1041 - 1043
[3] Contribution to the investigation of corrosion properties of the Ni-Ti alloy with shape memory
Sevcíková, J
Kocich, J
[J]. METALURGIJA, 2002, 41 (04): : 291 - 294
[4] Improvement of corrosion resistance and bio compatibility of Ni-Ti shape memory alloy by various surface modifications
Kimura, Y
[J]. COMPUTER METHODS AND EXPERIMENTAL MEASUREMENTS FOR SURFACE EFFECTS AND CONTACT MECHANICS VII, 2005, 49 : 3 - 11
[5] A Strain Rate Effect of Ni-Ti Shape Memory Alloy Wire
Kim, Sanghaun
Cho, Maenghyo
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2010, 49 (11)
[6] Heat treatment of Ni-Ti alloy for improvement of shape memory effect
Sadrnezhaad, K
Mashhadi, F
Sharghi, R
[J]. MATERIALS AND MANUFACTURING PROCESSES, 1997, 12 (01) : 107 - 115
[7] CASTING PROPERTIES OF NI-TI SHAPE MEMORY ALLOY
TAKAHASHI, J
OKAZAKI, M
KIMURA, H
FURUTA, Y
[J]. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1984, 18 (04): : 427 - 434
[8] NONDESTRUCTIVE EVALUATION OF NI-TI SHAPE MEMORY ALLOY
Meir, S.
Gordon, S.
Karsh, M.
Wiezman, A.
Ayers, R.
Olson, D. L.
[J]. REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 30A AND 30B, 2011, 1335 : 1208 - 1215
[9] Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy
Starosvetsky, D
Gotman, I
[J]. BIOMATERIALS, 2001, 22 (13) : 1853 - 1859
[10] Effect of thermal cycling on the transformation temperatures of a Ni-Ti shape memory alloy
Paula, AD
Canejo, JPHG
Silva, RJC
Fernandes, FMB
[J]. ADVANCED MATERIALS FORUM II, 2004, 455-456 : 346 - 349

← 1 2 3 4 5 →