Hot deformation behavior and globularization mechanism of Ti-6Al-4V-0.1B alloy with lamellar microstructure

被引：13

作者：

Yu, Yang ^{[1
]}

Xiong, Bai-Qing ^{[1
]}

Hui, Song-Xiao ^{[1
]}

Ye, Wen-Jun ^{[1
]}

机构：

[1] Gen Res Inst Nonferrous Met, State Key Lab Nonferrous Met & Proc, Beijing 100088, Peoples R China

来源：

RARE METALS | 2013年 / 32卷 / 02期

关键词：

Ti-6Al-4V-0.1B; Hot deformation; Lamellar microstructure; Globularization mechanism; BORON;

D O I：

10.1007/s12598-013-0022-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hot deformation behavior and globularization mechanism of Ti-6Al-4V-0.1B alloy with lamellar microstructure were quantitatively studied through isothermal compression tests with the temperature range of 850-950 A degrees C and strain rate range of 0.01-1.00 s(-1). The results show that the peak flow stress and steady stress are sensitive to the strain rate and temperature. The value of deformation activation energy is 890.49 kJ center dot mol(-1) in (alpha A + beta) region. Dynamic recrystallization is the major deformation mechanism. Flow softening is dominated by dynamic recrystallization at 850-950 A degrees C. TiB particles promote the recrystallization of alpha laths. Globularization processes consist of four steps: formation of subgrain after dynamic recovery in alpha plates; subgrain boundary migration caused by alpha/beta interfacial instability; interfacial migration promoting beta phase wedge into alpha phase; disintegrating of alpha laths by diffusion processes; and grain-boundary sliding. Globularization mechanisms during hot deformation processes of the Ti-6Al-4V-0.1B alloy with lamellar structure are continuous dynamic recrystallization.

引用

页码：122 / 128

页数：7

共 50 条

[1] Hot deformation behavior and globularization mechanism of Ti-6Al-4V-0.1B alloy with lamellar microstructure
Yang Yu
Bai-Qing Xiong
Song-Xiao Hui
Wen-Jun Ye
Rare Metals, 2013, 32 (02) : 122 - 128
[2] Hot deformation behavior and globularization mechanism of Ti-6Al-4V-0.1B alloy with lamellar microstructure
Yang Yu
Bai-Qing Xiong
Song-Xiao Hui
Wen-Jun Ye
Rare Metals, 2013, 32 : 122 - 128
[3] Study on Hot Deformation Behavior of Ti-6Al-4V-0.1B Alloy with Equiaxed Microstructure
Yu, Yang
Hui, Songxiao
Ye, Wenjun
Xiong, Baiqing
MATERIALS SCIENCE AND ENGINEERING TECHNOLOGY, 2012, 428 : 185 - 189
[4] Enhanced superplasticity for (α plus β)-hot rolled Ti-6Al-4V-0.1B alloy by means of dynamic globularization
Roy, Shibayan
Suwas, Satyam
MATERIALS & DESIGN, 2014, 58 : 52 - 64
[5] Superplastic behavior of Ti-6Al-4V-0.1B alloy
Sinha, V.
Srinivasan, R.
Tamirisakandala, S.
Miracle, D. B.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 539 : 7 - 12
[6] Compression Deformation Behavior of Ti-6Al-4V-0.1B Titanium Alloy at Elevated Temperature
Huang L.
Zhuang W.
Gao Z.
Xiyou Jinshu/Chinese Journal of Rare Metals, 2023, 47 (04): : 512 - 519
[7] Establishment of Constitutive Equation of Hot Deformation of Ti-6Al-4V-0.1B alloy with Widmannstatten structure
Yu, Y.
You, Z. P.
Hu, H. L.
Yu, W. J.
2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS, 2019, 544
[8] SEM/EBSD Analysis on Globularization Behavior of Lamellar Microstructure in Ti-6Al-4V During Hot Deformation and Annealing
Ito, Yoshinori
Murakami, Shogo
Tsuji, Nobuhiro
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (09): : 4237 - 4246
[9] Deformation mechanisms during superplastic testing of Ti-6Al-4V-0.1B alloy
Roy, Shibayan
Suwas, Satyam
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 574 : 205 - 217
[10] SEM/EBSD Analysis on Globularization Behavior of Lamellar Microstructure in Ti-6Al-4V During Hot Deformation and Annealing
Yoshinori Ito
Shogo Murakami
Nobuhiro Tsuji
Metallurgical and Materials Transactions A, 2017, 48 : 4237 - 4246

← 1 2 3 4 5 →