Lime composition for the walls of buildings made of aerated concrete

被引：0
|
作者：
Loganina, V. I. [1 ]
Frolov, M. V. [1 ]
Skachkov, Yu. P. [1 ]
机构：
[1] Penza State Univ Architecture & Construct, St Titov 28, Penza 440028, Russia
来源：
PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON MECHANICAL ENGINEERING AND MATERIAL SCIENCE | 2016年 / 93卷
关键词：
Aerated concrete; Calcium silicates; Lime; Strength; Structure formation;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
It is proposed to use for finishing the aerated concrete composition with limy binder. Composition includes limy binder, ground aerated concrete and additives based on a mixture of silicate and calcium aluminum silicates. It has been shown, that the introduction in lime composition ground aerated concrete in an amount of 20% by weight of the lime can improve the strength of lime composites. It is shown, that the combined use of lime, ground aerated concrete and additives based on a mixture of calcium silicate and silica-alumina allows to obtain limy composition, characterized by an accelerated set of plastic strength. The finishing composition on the basis of the developed formulation is characterized by high water-holding capacity, good workability.
引用
收藏
页码：165 / 169
页数：5
相关论文
共 50 条
  • [1] Sealing of Basement Walls made of Aerated Concrete
    Flassenberg, Georg
    MAUERWERK, 2006, 10 (02) : 59 - 64
  • [2] Effects of Brick and Aerated Concrete Infill Walls on Buildings
    Ozhan, Hacer Bilir
    Beklen, Caner
    Cagatay, Ismail H.
    ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2019, 9 (02) : 4002 - 4006
  • [3] Theoretical preconditions for optimization of composition and technological parameters of the plaster for walls made of aerated concrete blocks
    Paruta, V. A.
    Sayevskiy, A. A.
    Semina, Yu. A.
    Stolyar, E. A.
    Ustenko, A. V.
    Brynzin, E. V.
    MAGAZINE OF CIVIL ENGINEERING, 2012, 34 (08): : 36 - 44
  • [4] Development of prefabricated insulation elements for buildings with aerated autoclaved concrete walls
    Pihelo, Peep
    Kalamees, Targo
    12TH NORDIC SYMPOSIUM ON BUILDING PHYSICS (NSB 2020), 2020, 172
  • [5] FEM modeling of external walls made of autoclaved aerated concrete blocks
    Pukhkal, V. A.
    Mottaeva, A. B.
    MAGAZINE OF CIVIL ENGINEERING, 2018, 81 (05): : 203 - 212
  • [6] HEAT TRANSFER IN EXTERNAL WALLS MADE FROM AUTOCLAVED AERATED CONCRETE
    Vilnitis, Martins
    Gaujena, Baiba
    RENEWABLE ENERGY AND ENERGY EFFICIENCY, 2012, : 218 - 223
  • [7] Research on the Behavior of Stiffening Walls in Single-Storey Buildings Made of Autoclaved Aerated Concrete (AAC) Masonry Units
    Grzyb, Krzysztof
    Jasinski, Radoslaw
    MATERIALS, 2022, 15 (20)
  • [8] Full-scale studies of stiffening walls made of autoclaved aerated concrete
    Grzyb, Krzysztof
    Jasiński, Radoslaw
    ce/papers, 2023, 6 (02) : 135 - 141
  • [9] Burglar-resistant Properties of the Walls made of Autoclaved Aerated Concrete Masonry
    Flassenberg, Georg
    MAUERWERK, 2008, 12 (01) : 36 - 37
  • [10] Thermophysical field testing of residential buildings made of autoclaved aerated concrete blocks
    Korniyenko, S. V.
    Vatin, N. I.
    Gorshkov, A. S.
    MAGAZINE OF CIVIL ENGINEERING, 2016, 64 (04): : 10 - 25
12345