Comparison of strain ratio effect on cyclic plastic deformation for special stainless steels

被引：15
|
作者：
Huang, CS
Wang, SH
Wu, CC
Huang, YS
Fang, J
机构：
[1] Natl Taiwan Ocean Univ, Dept Mech & Mechatron Engn, Chilung 20224, Taiwan
[2] Outokumpu Asia Pacific, Taipei 24250, Taiwan
来源：
SCRIPTA MATERIALIA | 2006年 / 54卷 / 06期
关键词：
duplex stainless steels; 254; SMO; fatigue; strain ratio;
D O I：
10.1016/j.scriptamat.2005.11.034
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The response peak stresses of three stainless steels (SAF 2205, SAF 2507 and 254 SMO) show a trend of an initial cyclic hardening followed by a cyclic softening under different strain ratios and amplitudes. The fatigue life Of austenitic 254 SMO, with high Cr, Ni and Mo content, is superior to both duplex stainless steels composed of ferrite and austenite phases. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1181 / 1186
页数：6
相关论文
共 50 条
  • [1] Cyclic deformation behaviour of superduplex stainless steels
    Mateo, A
    Gironès, A
    Keichel, J
    Llanes, L
    Akdut, N
    Anglada, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 314 (1-2): : 176 - 185
  • [2] Micro cyclic deformation and strain localization behavior in austenitic ferritic duplex stainless steels
    Chai, G.
    Lillbacka, R.
    ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2008, 2008, : 433 - 433
  • [3] VARIATION OF PLASTIC STRAIN RATIO WITH STRAIN LEVEL IN STEELS
    ARTHEY, RP
    HUTCHINSON, WB
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (10): : 1817 - 1822
  • [4] The effect of martensite transformation induced by plastic deformation on the stainless steels formability limits
    Dariani, BM
    Sadough, A
    COMPUTATIONAL METHODS IN MATERIALS CHARACTERISATION, 2004, 6 : 111 - 120
  • [5] Cyclic deformation of superduplex stainless steels at intermediate temperatures
    A. Gironès
    L. Llanes
    M. Anglada
    A. Mateo
    Metallurgical and Materials Transactions A, 2006, 37 : 3519 - 3530
  • [6] Cyclic deformation of superduplex stainless steels at intermediate temperatures
    Girones, A.
    Llanes, L.
    Anglada, M.
    Mateo, A.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (12): : 3519 - 3530
  • [7] Hot deformation and restoration mechanisms in duplex stainless steels: Effect of strain rate
    Haghdadi, N.
    Cizek, P.
    Beladi, H.
    Hodgson, P. D.
    METALLURGIA ITALIANA, 2017, (09): : 5 - 16
  • [8] Modeling and simulation of temperature-dependent cyclic plastic deformation of austenitic stainless steels at the VHCF limit
    Hilgendorff, P. -M.
    Grigorescu, A.
    Zimmermann, M.
    Fritzen, C. -P.
    Christ, H. -J.
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1156 - 1163
  • [9] REVERSIBLE STRAIN IN CYCLIC PLASTIC-DEFORMATION
    SLEESWYK, AW
    JAMES, MR
    PLANTINGA, DH
    MAATHUIS, WST
    ACTA METALLURGICA, 1978, 26 (08): : 1265 - 1271
  • [10] PIPE DIAMETER AND PIPE THICKNESS EFFECT ON THE PLASTIC DEFORMATION BEHAVIOUR OF AUSTENITIC STAINLESS STEELS
    Di Schino, A.
    METALURGIJA, 2019, 58 (3-4): : 196 - 198
12345