The impact of selected granulometric properties of poly(vinyl chloride) on the effectiveness of the extrusion process

被引：15
|
作者：
Samujlo, Bronislaw [1 ]
Sikora, Janusz W. [1 ]
机构：
[1] Lublin Univ Technol, Dept Polymer Proc, PL-20618 Lublin, Poland
来源：
JOURNAL OF POLYMER ENGINEERING | 2013年 / 33卷 / 01期
关键词：
effectiveness of the extrusion process; granulometric properties; pellet length; EXTRUDER;
D O I：
10.1515/polyeng-2012-0100
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
The article presents results of a study of the effect of selected granulometric features of plastified poly(vinyl chloride) granule on the basic parameters of extrusion. In the study, it was determined how mass polymer flow rate, power supplied to the extruder, power transmitted by the polymer, unit energy consumption, and energy efficiency of the extrusion process were related to pellet length and bulk pellet density. The tests were carried out using an extruder with a screw diameter of 25 mm and a length-to-diameter ratio of 25, and involved processing of pellets of different lengths at variable rotational speeds of the screw. It was established that the granulometric features of plastified poly(vinyl chloride) considered in this study, i.e., pellet length and pellet bulk density, affect the effectiveness of the extrusion process. It was shown that best effectiveness of extrusion is achieved with the use of a granule characterized by a pellet length that is close to the other characteristic dimension of granule - its pellet diameter.
引用
收藏
页码：77 / 85
页数：9
相关论文
共 50 条
  • [1] THE EFFECT OF BLOWING AGENTS ON THE EFFECTIVENESS OF POLY(VINYL CHLORIDE) EXTRUSION
    Garbacz, Tomasz
    Jachowicz, Tomasz
    Tor-Swiatek, Aneta
    [J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2016, 10 (32): : 217 - 223
  • [2] EXTRUSION CHARACTERISTICS OF POLY(VINYL CHLORIDE)
    MAYRICK, RG
    SIEGLAFF, CL
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1965, 9 (12) : 3917 - &
  • [3] Rheological properties of suspension poly(vinyl chloride) formulations in extrusion dies
    Glomsaker, T
    Hinrichsen, EL
    Larsen, Å
    Thorsteinsen, P
    [J]. PLASTICS RUBBER AND COMPOSITES, 1999, 28 (04) : 145 - 151
  • [4] SINGLE SCREW EXTRUSION OF POLY(VINYL CHLORIDE) - EFFECT ON FUSION AND PROPERTIES
    COVAS, JA
    GILBERT, M
    [J]. POLYMER ENGINEERING AND SCIENCE, 1992, 32 (11): : 743 - 750
  • [5] Investigation of the Poly(vinyl chloride) Extrusion Process Using a Feed Throat With a Feed Pocket
    Sikora, Janusz W.
    Samujlo, Bronislaw
    [J]. POLYMER ENGINEERING AND SCIENCE, 2014, 54 (09): : 2037 - 2045
  • [6] The extrusion of plasticized poly(vinyl chloride) in an extruder with a modified feed zone. Part 1: extrusion process
    Sikora, Janusz W.
    Samujlo, Bronislaw
    Stasiek, Andrzej
    [J]. JOURNAL OF POLYMER ENGINEERING, 2015, 35 (02) : 191 - 198
  • [7] THE EFFECT OF LUBRICANTS ON THE EXTRUSION CHARACTERISTICS OF POLY VINYL-CHLORIDE
    COLLINS, EA
    FAHEY, TE
    HOPFINGER, AJ
    [J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1982, 183 (MAR): : 79 - ORPL
  • [8] Flow instability in capillary extrusion of plasticized poly(vinyl chloride)
    Yamaguchi, M
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 82 (05) : 1277 - 1283
  • [9] Thermodestruction in the surface layer of poly(vinyl chloride) during extrusion
    Lipik, Vitali T.
    Abadie, Marc J. M.
    Prokoptchuk, Nikolay R.
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (04) : 2076 - 2080
  • [10] Tensile And Impact Properties of Sugarcane Bagasse/Poly (Vinyl Chloride) Composites
    Wirawan, Riza
    Sapuan, S. M.
    Abdan, Khalina
    Yunus, Robiah
    [J]. COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 167 - +
12345