Mode I and II fracture behaviour of rubber modified brittle epoxies

被引：7

作者：

Kim, HS ^{[1
]}

Ma, P ^{[1
]}

机构：

[1] Univ Newcastle, Dept Mech Engn, Callaghan, NSW 2308, AUSTRALIA

来源：

POLYMER BLENDS AND POLYMER COMPOSITES | 1998年 / 137卷

关键词：

fracture; toughness; epoxy; mode II; shear deformation; cavitation; adhesion; DDS; rubber; adhesive;

D O I：

10.4028/www.scientific.net/KEM.137.179

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of rubber modification on a brittle epoxy system cured using DDS has been studied in terms of fracture behaviour. Fracture mechanism, deformation and fracture surface characteristics under mode II loading have been investigated in comparison with those under mode I loading. For mode II fracture, two different types of tests were employed ie four-point shear tests for bulky epoxies and compact shear specimen tests for adhesive layers sandwiched between 6060-T5 aluminium. The fracture toughness in the former has been found to decrease with rubber modification. Fracture surfaces were examined in association with this result and was discussed in terms of cavitation and shear deformation. The fracture toughness in the latter for rubber modified epoxies has been found to also decrease as compared to the control. This result was discussed in relation to the density of tunnelling of microcracks. Also it was found that the fracture toughness of the control under mode II loading for either type is higher than that under mode I loading.

引用

页码：179 / 186

页数：8

共 50 条

[1] Mode II fracture behaviour of PET modified brittle epoxies
Kim, HS
Ma, P
FRACTURE AND STRENGTH OF SOLIDS, PTS 1 AND 2: PT 1: FRACTURE MECHANICS OF MATERIALS; PT 2: BEHAVIOR OF MATERIALS AND STRUCTURE, 1998, 145-9 : 759 - 764
[2] Mode II fracture mechanisms of PET-modified brittle epoxies
Kim, HS
Ma, P
JOURNAL OF APPLIED POLYMER SCIENCE, 1998, 69 (02) : 405 - 415
[3] FRACTURE-TOUGHNESS AND THE CORRESPONDING TOUGHENING MECHANISMS OF RUBBER-MODIFIED BRITTLE EPOXIES
SUE, HJ
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1990, 200 : 68 - PMSE
[4] Criterion for combined mode I-II of brittle fracture
Awaji, H
Kato, T
Honda, S
Nishikawa, T
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1999, 107 (10) : 918 - 924
[5] Criterion for combined mode I-II brittle fracture
Awaji, H
Kato, T
MATERIALS TRANSACTIONS JIM, 1999, 40 (09): : 972 - 979
[6] Fracture Behaviour of Epoxy Resins Modified With Liquid Rubber and Cross linked Rubber Particles under Mode I Loading
Imanaka, Makoto
Ikeda, Keisuke
Nakamura, Yoshinobu
Kimoto, Masaki
POLYMERS & POLYMER COMPOSITES, 2015, 23 (06): : 399 - 405
[7] Mode I-II combined mode fracture criterion for brittle materials
Awaji, H
Kato, T
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1998, 62 (08) : 735 - 741
[8] Mode I-II combined mode fracture criterion for brittle materials
Nagoya Inst of Technology, Nagoya, Japan
Nippon Kinzoku Gakkaishi, 8 (735-741):
[9] COMBINED MODE I-MODE-II AND MODE I-MODE-III FRACTURE OF BRITTLE MATERIALS
SURESH, S
SHIH, CF
SCRIPTA METALLURGICA ET MATERIALIA, 1991, 25 (05): : 991 - 996
[10] Effects of particle size and rubber content on fracture toughness in rubber-modified epoxies
Kim, DS
Cho, K
Kim, JK
Park, CE
POLYMER ENGINEERING AND SCIENCE, 1996, 36 (06): : 755 - 768

← 1 2 3 4 5 →