Liquefaction of kenaf (Hibiscus cannabinus L.) core for wood laminating adhesive

被引：40

作者：

Juhaida, M. F. ^{[2
]}

Paridah, M. T. ^{[1
]}

Hilmi, M. Mohd. ^{[5
]}

Sarani, Z. ^{[4
]}

Jalaluddin, H. ^{[1
]}

Zaki, A. R. Mohamad ^{[3
]}

机构：

[1] Univ Putra Malaysia, Inst Trop Forestry & Forest Prod, Serdang 43400, Selangor, Malaysia

[2] Univ Putra Malaysia, Fac Forestry, Serdang 43400, Selangor, Malaysia

[3] Univ Putra Malaysia, Fac Sci, Serdang 43400, Selangor, Malaysia

[4] Univ Kebangsaan Malaysia, Fac Sci & Technol, Mat Sci Programme, Bangi 43600, Selangor, Malaysia

[5] Agensi Nuklear Malaysia, Kajang 43000, Selangor, Malaysia

来源：

BIORESOURCE TECHNOLOGY | 2010年 / 101卷 / 04期

关键词：

Liquefaction; Polyurethane; Kenaf core; Wood laminating adhesive; LIQUEFIED WOOD;

D O I：

10.1016/j.biortech.2009.09.048

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

A study was carried out to produce polyurethane (PU) as a wood laminating adhesive from liquefied kenaf core (LKC) polyols by reacting it with toluene-2,4-diisocyanate (TDI) and 1,4-butanediol (BDO). The LKC polyurethane (LKCPU) adhesive has a molecular weight (MW) of 2666, viscosity of 5370 mPa s, and solids content of 86.9%. The average shear strength of the rubberwood (RW) bonded with LKCPU adhesive was 2.9 MPa. Most of the sheared specimens experienced a total adhesive failure. The formation of air bubbles through the liberation of carbon dioxide was observed to reduce the adhesive penetration and bonding strength which was obviously seen on the sheared specimens. The percentage of catalyst used can be varied based on the usage and working time needed. Nonetheless, the physical properties of LKCPU produced in this work had shown good potential as edge-bonding adhesive. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：1355 / 1360

页数：6

共 50 条

[1] Biofuel production by liquefaction of kenaf (Hibiscus cannabinus L.) biomass
Meryemoglu, Bahar
Hasanoglu, Arif
Irmak, Sibel
Erbatur, Oktay
[J]. BIORESOURCE TECHNOLOGY, 2014, 151 : 278 - 283
[2] Kenaf (Hibiscus Cannabinus L.) Breeding
Afzal, Muhammad Zohaib
Ibrahim, Aminu Kurawa
Xu, Yi
Niyitanga, Sylvain
Li, Yi
Li, Dongxu
Yang, Xin
Zhang, Liwu
[J]. JOURNAL OF NATURAL FIBERS, 2022, 19 (11) : 4063 - 4081
[3] Kenaf (Hibiscus cannabinus L.) core as a containerized growth medium component
Webber, CL
Whitworth, J
Dole, J
[J]. INDUSTRIAL CROPS AND PRODUCTS, 1999, 10 (02) : 97 - 105
[4] Hibiscus cannabinus L. - Kenaf : A Review Paper
Ayadi, R.
Hanana, M.
Mzid, R.
Hamrouni, L.
Khouja, M. I.
Hanachi, A. Salhi
[J]. JOURNAL OF NATURAL FIBERS, 2017, 14 (04) : 466 - 484
[5] Effect of Pretreatment Process on Bioconversion of Kenaf (Hibiscus cannabinus L.) Core to Glucose
Ng, Sim Hong
Tahir, Paridah Md
Mohamad, Rosfarizan
Abdullah, Luqman C.
Choo, Adrian C. Y.
Liong, Yan Yee
[J]. BIORESOURCES, 2013, 8 (02): : 2010 - 2017
[6] Effect of pretreatment process on bioconversion of kenaf (hibiscus cannabinus l.) core to glucose
[J]. Tahir, P.M. (parida@introp.upm.edu.my), 2010, North Carolina State University (08):
[7] Development and characterization novel bio-adhesive for wood using kenaf core (Hibiscus cannabinus) lignin and glyoxal
Hussin, M. Hazwan
Aziz, Alia Abdul
Iqbal, Anwar
Ibrahim, Mohamad Nasir Mohamad
Abd Latif, Nur Hanis
[J]. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2019, 122 : 713 - 722
[8] New applications of kenaf (Hibiscus cannabinus L.) as microfiltration membranes
Radiman, C. L.
Widyaningsih, S.
Sugesty, S.
[J]. JOURNAL OF MEMBRANE SCIENCE, 2008, 315 (1-2) : 141 - 146
[9] Chemical composition of kenaf (Hibiscus cannabinus L.) seed oil
Koga, T
Miyata, N
Ishii, T
Ohta, H
[J]. NIPPON NOGEIKAGAKU KAISHI-JOURNAL OF THE JAPAN SOCIETY FOR BIOSCIENCE BIOTECHNOLOGY AND AGROCHEMISTRY, 2001, 75 (12): : 1291 - 1295
[10] IRRIGATION OF KENAF (HIBISCUS, CANNABINUS L) IN THE SUDAN
FARAH, SM
[J]. JOURNAL OF AGRICULTURAL SCIENCE, 1981, 96 (JUN): : 569 - 578

← 1 2 3 4 5 →