Specific heat of metal powder-polymer feedstock for powder injection molding

被引：14
|
作者：
Kowalski, L [1 ]
Duszczyk, J [1 ]
机构：
[1] Delft Univ Technol, Mat Sci Lab, NL-2628 AL Delft, Netherlands
来源：
JOURNAL OF MATERIALS SCIENCE LETTERS | 1999年 / 18卷 / 17期
关键词：
D O I：
10.1023/A:1006623507854
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In order to eliminate the technical difficulties associated with the powder injection molding (PIM) development, it is important to numerically simulate the PIM process before moving to the shop-floor level. Rheological-, p-V-T-, specific heat-, thermal conductivity-, density data are some of the required inputs for simulation. This article discusses some of the results of an investigation on the specific heat of the commercially available 316L BASF powder injection molding feedstocks.
引用
收藏
页码：1417 / 1420
页数：4
相关论文
共 50 条
  • [1] Thermal conductivity of metal powder-polymer feedstock for powder injection moulding
    L. Kowalski
    J. Duszczyk
    L. Katgerman
    Journal of Materials Science, 1999, 34 : 1 - 5
  • [2] Thermal conductivity of metal powder-polymer feedstock for powder injection moulding
    Kowalski, L
    Duszczyk, J
    Katgerman, L
    JOURNAL OF MATERIALS SCIENCE, 1999, 34 (01) : 1 - 5
  • [3] Torque rheometry and rheological analysis of powder-polymer mixture for aluminum powder injection molding
    Abdoos, H.
    Khorsand, H.
    Yousefi, A. A.
    IRANIAN POLYMER JOURNAL, 2014, 23 (10) : 745 - 755
  • [4] Measurements of Powder-Polymer Mixture Properties and Their Use in Powder Injection Molding Simulations for Aluminum Nitride
    Kate, Kunal H.
    Onbattuvelli, Valmikanathan P.
    Enneti, Ravi K.
    Lee, Shi W.
    Park, Seong-Jin
    Atre, Sundar V.
    JOM, 2012, 64 (09) : 1048 - 1058
  • [5] Evaluation of feedstock for powder injection molding
    Jang, Jin Man
    Lee, Hyeongjae
    Lee, Wonsik
    Kim, Yong-In
    Ko, Se-Hyun
    Kim, Jong Ha
    Lee, Jai-Sung
    Choi, Joon-Phil
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2014, 53 (05)
  • [6] Evaluation of feedstock for powder injection molding
    Jang, Jin Man
    Lee, Hyeongjae
    Lee, Wonsik
    Kim, Yong-In
    Ko, Se-Hyun
    Kim, Jong Ha
    Lee, Jai-Sung
    Choi, Joon-Phil
    Japanese Journal of Applied Physics, 2014, 53 (5 SPEC. ISSUE 3)
  • [7] Characterization of powder injection molding feedstock
    Liu, ZY
    Loh, NH
    Tor, SB
    Khor, KA
    MATERIALS CHARACTERIZATION, 2002, 49 (04) : 313 - 320
  • [8] Feedstock development for micro powder injection molding
    Merz, L
    Rath, S
    Piotter, V
    Ruprecht, R
    Ritzhaupt-Kleissl, J
    Hausselt, J
    MICROSYSTEM TECHNOLOGIES, 2002, 8 (2-3) : 129 - 132
  • [9] Feedstock development for micro powder injection molding
    L. Merz
    S. Rath
    V. Piotter
    R. Ruprecht
    J. Ritzhaupt-Kleissl
    J. Hausselt
    Microsystem Technologies, 2002, 8 (2) : 129 - 132
  • [10] Mixing and characterization of feedstock for powder injection molding
    Supati, R
    Loh, NH
    Khor, KA
    Tor, SB
    MATERIALS LETTERS, 2000, 46 (2-3) : 109 - 114
12345