An optical lever by using a mode-locked laser for angle measurement

A new concept of optical lever for angle measurement having an extended angular measurement range with a mode-locked laser as the light source, which is significantly extended from the conventional photodiode (PD)-type optical levers with a single frequency laser, is proposed. In the proposed concept, a collimated laser beam of the mode-locked laser is made incident to a grating reflector to generate a group of first-order diffracted beams from the grating reflector. Differing from a conventional PD-type optical lever employing a laser beam with a single frequency as the light source, the angle measurement range can be significantly expanded for the sake of the group of widely-spread first-order diffracted beams. In addition, the proposed optical lever has a potential of assuring the traceability of angle measurement by linking it to the optical frequency comb based on the mode-locked laser, which is employed as the national standard of time and frequency. In this paper, as a first step of this research, a mode-locked femtosecond laser is employed as the light source of the proposed optical lever. To distinguish each of the first-order diffracted beams generated with the combination of the mode-locked femtosecond laser and the diffraction grating having a grating period of 1.67 mu m, a Fabry-Perot etalon is employed in the setup of the optical lever to modulate the distance between two neighboring beams in the group of first-order diffracted beams. Experimental setups are developed, and basic experiments are carried out to verify the feasibility of the proposed optical lever. (C) 2016 Elsevier Inc. All rights reserved.