STATUS OF DESIGN AND R&D FOR ITER BLANKET IN KOREA

Since the decision of blanket redesign by 2007 ITER design review, the blanket system is being developed in the framework of Blanket Integrated Product Team (BIPT) composed mainly of ITER Organization (IO) and procuring parties. Korean Domestic Agency (KODA) is mainly contributing to the design and development of blanket Shield Block (SB). In particular, KODA is supporting the design activities including electromagnetic, thermo-hydraulic and thermo-mechanical analyses to complete the final design of blanket shield block. For the manufacturing of a blanket shield block conventional fabrication techniques based on drilling, milling and welding of stainless steel forged blocks have been adopted As a consequence of the manufacturing feasibility study, key fabrication techniques to be verified beforehand have been identified and successfully developed in collaboration with related industries. The pre-qualification program of the fabrication and testing of Full Scale Prototype (FSP) is in progress. Until now the material development of 316L(N)-IG stainless steel forging has been successfully completed, and the fabrication of FSP is on-going. Even though the procurement of blanket First Wall (FW) was withdrawn at the 96 meeting of the ITER Management Advisory Committee, the participation of the 2nd pre-qualification program of EHF (Enhanced Heat Flux) FW small scale mock is being valid for securing core engineering technologies. At present the fabricated mock-ups are waiting for high heat flux test with the Electron Beam (EB) gun test facility being newly built in Korea. This paper provides the current status of design and relevant R&D activities of the blanket system to secure key technologies and to fulfill our promise to ITER project.