Load-bearing characteristics of heat-treated rubberwood furniture components and joints

被引：0
|
作者：
Ratnasingam, J. [1 ]
Ioras, Florin [2 ]
机构：
[1] Univ Putra Malaysia, Fac Forestry, Serdang 43400, Selangor, Malaysia
[2] Buckinghamshire New Univ, Fac Technol, High Wycombe 11 2 JZ, Bucks, England
来源：
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS | 2013年 / 71卷 / 02期
关键词：
WOOD; STRENGTH; FATIGUE; DESIGN;
D O I：
10.1007/s00107-013-0662-y
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
The load bearing characteristics of heat-treated rubberwood furniture components and joints were studied. It was found that heat-treated samples had significantly lower fatigue strength compared to the conventionally kiln-dried rubberwood samples, which were used as control specimens. Inevitably, the recommended allowable design stresses for heat-treated rubberwood furniture components and joints could be set at 40 and 25 % of the respective bending strengths, in order to ensure its compliance with furniture performance standards. These figures are much lower than the allowable design stresses for conventionally kiln dried components, reflecting the need for a lower safety margin when working with heat-treated materials.
引用
收藏
页码：287 / 289
页数：3
相关论文
共 50 条
  • [1] Load-bearing characteristics of heat-treated rubberwood furniture components and jointsTragfähigkeit von Möbelelementen und -verbindungen aus hitzebehandeltem Gummibaumholz
    J. Ratnasingam
    Florin Ioras
    European Journal of Wood and Wood Products, 2013, 71 (2) : 287 - 289
  • [2] Load-bearing capacity and load-bearing behaviour of notched joints
    Meisel, Andreas
    Wallner, Bernhard
    Schickhofer, Gerhard
    BAUTECHNIK, 2015, 92 (06) : 412 - 423
  • [3] Load-bearing capacity and load-bearing behaviour of lap joints loaded in compression
    Meisel, Andreas
    Wallner, Bernhard
    Schickhofer, Gerhard
    BAUTECHNIK, 2015, 92 (10) : 702 - 715
  • [4] Temperature dependence of thermal conductivity of heat-treated rubberwood
    Srivaro, Suthon
    Borcsok, Zoltan
    Pasztory, Zoltan
    WOOD MATERIAL SCIENCE & ENGINEERING, 2021, 16 (02) : 81 - 84
  • [5] A JOINT SIMULATING MACHINE FOR LOAD-BEARING JOINTS
    DOWSON, D
    WALKER, PS
    LONGFIELD, MD
    WRIGHT, V
    MEDICAL & BIOLOGICAL ENGINEERING, 1970, 8 (01): : 37 - +
  • [6] HS-SPME and GC–MS for the analysis of odorous constituents from heat-treated rubberwood and the chemical change of heat-treated rubberwood by XPS analysis
    Tongtong Li
    Guanjun Li
    Jianing Li
    Xiaowen Li
    Min Li
    Yachao Li
    Wood Science and Technology, 2021, 55 : 361 - 378
  • [7] Load-bearing furniture modules for fast deployable and reusable systems
    Riggio, Mariapaola
    Vedove, Alberto Dalle
    Piazza, Maurizio
    FRONTIERS IN BUILT ENVIRONMENT, 2024, 10
  • [8] HS-SPME and GC-MS for the analysis of odorous constituents from heat-treated rubberwood and the chemical change of heat-treated rubberwood by XPS analysis
    Li, Tongtong
    Li, Guanjun
    Li, Jianing
    Li, Xiaowen
    Li, Min
    Li, Yachao
    WOOD SCIENCE AND TECHNOLOGY, 2021, 55 (02) : 361 - 378
  • [9] Straightening heat-treated components
    Mitze, Manfred
    HTM - Haerterei-Technische Mitteilungen, 2010, 65 (02): : 110 - 117
  • [10] Straightening heat-treated components
    Mitze, M.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2010, 65 (02): : 110 - 117
12345