Semi-analytical Modeling of the End-Winding Self-Inductance in Large AC Machines

被引：0

作者：

Grop, H. ^{[1
]}

Soulard, J. ^{[1
]}

Krings, A. ^{[1
]}

Persson, H. ^{[2
]}

机构：

[1] Royal Inst Technol, Elect Energy Convers Dept, Stockholm, Sweden

[2] ABB Machines, Vasteras, Sweden

来源：

2012 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2012) | 2012年

关键词：

End-winding; inductance; leakage; AC machines;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

A semi-analytical model for calculation of self-inductance of complex coil geometries having a rectangular cross-section (form-wound coils) is proposed and evaluated. A step-by-step validation is carried on using both 2D-FEM simulations and measurements on a coil placed in air. A second version of the model is developed, to speed up the computation time through removing the possibility to analyze the contribution of the internal flux in the conductor. The predicted value of the self-inductance of a diamond-shaped coil placed in air is within 5% of the measured value.

引用

页数：6

共 32 条

[1] Analytical Computation of End-Winding Leakage Inductance for Multi-Phase AC Machines
Lin, D.
Zhou, P.
Hu, Y.
Rosu, M.
2017 IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE (IEMDC), 2017,
[2] Analytical Estimation of End-Winding Leakage Inductance of Stator Winding of Electric Machines
Chuvash State University, Cheboksary
428015, Russia
Russ Electr Eng, 2024, 6 (493-498): : 493 - 498
[3] Evaluation of Calculation Methods and the Effect of End-Winding Inductance on the Performance of Non Overlap Winding PM Machines
Potgieter, J. H. J.
Kamper, M. J.
2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2012, : 243 - 249
[4] A Rectangular End-Winding Model for Enhanced Circulating Current Prediction in AC Machines
Maurer, Frederic
Noland, Jonas Kristiansen
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2021, 36 (01) : 291 - 299
[5] Accurate analytical modeling of frequency dependent loop self-inductance
Mondal, Mosin
Massoud, Yehia
JOURNAL OF CIRCUITS SYSTEMS AND COMPUTERS, 2008, 17 (01) : 77 - 93
[6] Calculation of end-winding leakage inductance for hairpin winding high power density traction machines using the PEEC method
Silberberger, Marco
Morisco, David Philipp
Rapp, Holger
Moeckel, Andreas
2021 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2021,
[7] Analytical determination of the end-winding portion of the winding-to-rotor capacitance for the prediction of bearing voltage in electrical machines
Stockbruegger, Jan Ole
Ponick, Bernd
ELECTRICAL ENGINEERING, 2020, 102 (04) : 2481 - 2491
[8] Analytical determination of the end-winding portion of the winding-to-rotor capacitance for the prediction of bearing voltage in electrical machines
Jan Ole Stockbrügger
Bernd Ponick
Electrical Engineering, 2020, 102 : 2481 - 2491
[9] Calculation Methods and Effects of End-Winding Inductance and Permanent-Magnet End Flux on Performance Prediction of Nonoverlap Winding Permanent-Magnet Machines
Potgieter, Johannes H. J.
Kamper, Maarten J.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2014, 50 (04) : 2458 - 2466
[10] Correction to: Analytical determination of the end-winding portion of the winding-to-rotor capacitance for the prediction of bearing voltage in electrical machines
Jan Ole Stockbrügger
Bernd Ponick
Electrical Engineering, 2022, 104 : 1931 - 1931

← 1 2 3 4 →