The Application of Ti/Al2O3 Composite in W-Mo-Al System Wave Impedance Graded Flier-plate

被引：0
|
作者：
Wang, Z. [1 ]
Feng, S. [1 ]
Shi, G. P. [1 ]
Shen, Q. [2 ]
Zhang, L. M. [2 ]
机构：
[1] Univ Jinan, Sch Mat Sci & Engn, Jinan 250022, Peoples R China
[2] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synthesis & Proc, Wuhan 430070, Peoples R China
来源：
12TH INTERNATIONAL SYMPOSIUM ON MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS (FGM 2012) | 2013年 / 419卷
关键词：
HIGH-PRESSURE;
D O I：
10.1088/1742-6596/419/1/012043
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti/Al2O3 composite of different components were prepared by Spark Plasma Sintering technique, mechanical and acoustical properties of Ti/Al2O3 composite were analyzed, weldability of Ti/Al2O3 composite with Mo and Al was also studied. The results indicate that 38.5vol% Ti/Al2O3 composite has good mechanical performance with relative density >99.20%, bending strength 897MPa, fracture toughness 17.38 MPa.m(1/2) and micro-hardness 17.13GPa. The wave impedance of the composite was between which of Mo and Al, and the 38.5vol% Ti/Al2O3 welded well with Mo and Ti. These demonstrate that 38.5vol% Ti/Al2O3 composite could serve as one of interlayer materials in W-Mo-Al system graded flier-plate.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Preparation of W-Mo-Ti graded density flier-plate materials
    Shen, Q
    Zhang, LM
    Xiong, HP
    Chen, LD
    Hirai, T
    FUNCTIONALLY GRADED MATERIALS 2000, 2001, 114 : 373 - 379
  • [2] Fabrication of W-Mo-Ti system flier-plate with graded impedance for generating quasi-isentropic compression
    Shen, Q
    Zhang, LM
    Xiong, HP
    Hua, JS
    Tan, H
    CHINESE SCIENCE BULLETIN, 2000, 45 (15): : 1421 - 1424
  • [3] Fabrication of W-Mo-Ti system flier-plate with graded impedance for generating quasi-isentropic compression
    SHEN Qiang
    2. Laboratory of Shock Waves and Detonation Physics
    Chinese Science Bulletin, 2000, (15) : 1421 - 1424
  • [4] Flier-plate material with graded wave impedance and application in dynamic high-pressure physics
    Wang, CB
    Zhang, LM
    JOURNAL OF INORGANIC MATERIALS, 2002, 17 (05) : 925 - 930
  • [5] Quasi-isentropic compression characteristics of W-Mo-Ti graded density flier-plate materials
    Shen, Q
    Li, JG
    Wang, CB
    Zhang, LM
    Tan, H
    FUNCTIONALLY GRADED MATERIALS 2000, 2001, 114 : 699 - 704
  • [6] EFFECT OF F AND MG ON THE DISPERSION OF MO/AL2O3 AND W/AL2O3
    MULCAHY, FM
    HOUALLA, M
    HERCULES, DM
    JOURNAL OF CATALYSIS, 1993, 139 (01) : 72 - 80
  • [7] The Influence of Mo Additive on the Microstructure and Property of Ti/Al2O3 Composite
    王志
    Journal of Wuhan University of Technology-Materials Science, 2003, (04) : 61 - 63
  • [8] The influence of mo additive on the microstructure and property of Ti/Al2O3 composite
    Wang Zhi
    Li Ming-ling
    Shen Qiang
    Zhang Lian-meng
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2003, 18 (4): : 61 - 63
  • [9] The influence of Mo additive on the microstructure and property of Ti/Al2O3 composite
    Wang, Z
    Li, ML
    Shen, Q
    Zhang, LM
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2003, 18 (04): : 61 - 63
  • [10] Mechanical properties and microstructure of Fe-Al/Al2O3 composite with Cr, Mo and Ti
    Li, AM
    Sun, KN
    Bi, JQ
    Yin, YS
    Zhang, YJ
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 (04) : 860 - 863
12345