Sensitivity analysis applied to the multi-objective optimization of a MCFC hybrid plant

被引:25
|
作者
Sciacovelli, Adriano [1 ]
Verda, Vittorio [1 ]
机构
[1] Politecn Torino, Dipartimento Energet, I-10129 Turin, Italy
关键词
Molten carbonate fuel cell; Lifetime analysis; Multi-objective optimization; Sensitivity analysis; OXIDE FUEL-CELL; THERMOECONOMIC ANALYSIS; GENERATION; SYSTEMS;
D O I
10.1016/j.enconman.2012.02.011
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this paper, the multi-objective optimization of a molten carbonate fuel cell (MCFC) based hybrid plant fueled with landfill gas is performed. System operation is significantly affected by off-design conditions. These are due to variations methane concentration occurring as the landfill depletes, performance degradations of the components, particularly the fuel cell, and ambient conditions. For these reasons, the objective functions are defined considering the plant lifetime. Some of the parameters affecting the results, as the voltage degradation, the cost of fuel cell, the methane concentration and the unit cost of landfill gas can be only estimated or forecasted and their actual values are uncertain. Therefore, the optimization is performed considering a sensitivity analysis in order to estimate the effects of possible variations on the Pareto front. The following free design variables are considered: pressure and temperature operation of the MCFC, turbine inlet temperature, fuel mass flow rate. In addition, the optimal configuration of the heat exchanger network is selected for each set of the design variable. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:180 / 187
页数:8
相关论文
共 50 条
  • [1] Analysis of multi-objective optimization applied to the simulation of a natural gas separation plant
    Lemos, Israel dos Santos
    Santos, Lizandro de Sousa
    GAS SCIENCE AND ENGINEERING, 2024, 128
  • [2] Multi-objective optimization and sensitivity analysis of tube hydroforming
    Honggang An
    Daniel E. Green
    Jennifer Johrendt
    The International Journal of Advanced Manufacturing Technology, 2010, 50 : 67 - 84
  • [3] Multi-objective optimization and sensitivity analysis of tube hydroforming
    An, Honggang
    Green, Daniel E.
    Johrendt, Jennifer
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 50 (1-4): : 67 - 84
  • [4] A new hybrid memetic multi-objective optimization algorithm for multi-objective optimization
    Luo, Jianping
    Yang, Yun
    Liu, Qiqi
    Li, Xia
    Chen, Minrong
    Gao, Kaizhou
    INFORMATION SCIENCES, 2018, 448 : 164 - 186
  • [5] Hybrid Multi-Objective Genetic Algorithm for Multi-Objective Optimization Problems
    Zhang, Song
    Wang, Hongfeng
    Yang, Di
    Huang, Min
    2015 27TH CHINESE CONTROL AND DECISION CONFERENCE (CCDC), 2015, : 1970 - 1974
  • [6] Analysis of a Hybrid Genetic Simulated Annealing Strategy Applied in Multi-Objective Optimization of Orbital Maneuvers
    Shirazi, Abolfazl
    IEEE AEROSPACE AND ELECTRONIC SYSTEMS MAGAZINE, 2017, 32 (01) : 6 - 22
  • [7] Multi-objective optimization of a trigeneration plant
    Kavvadias, K. C.
    Maroulis, Z. B.
    ENERGY POLICY, 2010, 38 (02) : 945 - 954
  • [8] Hybrid Metaheuristics for Multi-objective Optimization
    Talbi, E-G.
    JOURNAL OF ALGORITHMS & COMPUTATIONAL TECHNOLOGY, 2015, 9 (01) : 41 - 63
  • [9] Sensitivity Analysis and Multi-objective Optimization Design of Parallel Manipulators
    Yang C.
    Ye W.
    Chen Q.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2022, 58 (19): : 229 - 241
  • [10] Sensitivity Analysis for Multi-Objective Optimization of the Benchmark TEAM Problem
    Seo, Minsik
    Ryu, Namhee
    Min, Seungjae
    IEEE TRANSACTIONS ON MAGNETICS, 2020, 56 (01)