Low-Cost, Rapid Prototyping of IMU and Pressure Monitoring System using an Open Source Hardware Design

被引：0
|
作者：
Russell, Luke [1 ]
Steele, Alan L. [2 ]
Goubran, Rafik [1 ,3 ]
机构：
[1] Carleton Univ, Dept Syst & Comp Engn, Ottawa, ON K1S 5B6, Canada
[2] Carleton Univ, Dept Elect, Ottawa, ON, Canada
[3] Carleton Univ, Dept Syst & Comp Engn, Ottawa, ON, Canada
来源：
2012 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC) | 2012年
基金：
加拿大自然科学与工程研究理事会;
关键词：
Accelerometer; Prototypes; Open source hardware; Open source software; Microcontrollers;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Open source hardware is a type of hardware where the schematics and designs are made unrestricted and available to all. They are often accompanied by open source software. This can bring reliability, ease of debugging, and modular development for rapid prototyping using pre-written libraries. Merits of using open source hardware are discussed and then applied to a portable sensor system based on the open hardware Arduino-derived Jeenode microcontroller board. The system uses an inertial measurement unit (IMU) and seamless integration of other sensors, including a piezo-resistive pressure sensor. It is shown that open source hardware can help to increase rapid development, reduce costs, and encourage further development.
引用
收藏
页码：2695 / 2699
页数：5
相关论文
共 50 条
  • [1] Open source low-cost power monitoring system
    Oberloier, Shane
    Pearce, Joshua M.
    [J]. HARDWAREX, 2018, 4
  • [2] Low-cost, rapid deployment, over-the-top HVAC and room thermal efficiency system using open source hardware design
    Russell, Luke
    Goubran, Rafik
    Kwamena, Felix
    [J]. 2017 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC), 2017, : 1235 - 1240
  • [3] Model-Based Design for Rapid Controller Prototyping of Furuta Pendulum: a Case Study Using Low-Cost Hardware
    Nunna, Kameswarie
    Gautier, Nicolas
    Malack, Sebastian
    Kim, Mischa
    [J]. 2016 UKACC 11TH INTERNATIONAL CONFERENCE ON CONTROL (CONTROL), 2016,
  • [4] The Feasibility of a Cloud-Based Low-Cost Environmental Monitoring System Via Open Source Hardware in Greenhouses
    Cayli, Ali
    Akyuz, Adil
    Baytorun, A. Nafi
    Ustun, Sait
    Mercanli, Ali Selcuk
    [J]. KSU TARIM VE DOGA DERGISI-KSU JOURNAL OF AGRICULTURE AND NATURE, 2018, 21 (03): : 323 - 338
  • [5] openEyes: an open-hardware open-source system for low-cost eye tracking
    Li, Dongheng
    Parkhurst, Derrick J.
    [J]. JOURNAL OF MODERN OPTICS, 2006, 53 (09) : 1295 - 1311
  • [6] An Open-Source and Low-Cost Monitoring System for Precision Enology
    Di Gennaro, Salvatore Filippo
    Matese, Alessandro
    Mancin, Mirko
    Primicerio, Jacopo
    Palliotti, Alberto
    [J]. SENSORS, 2014, 14 (12): : 23388 - 23397
  • [7] TEACHING NEURAL NETWORK CONTROL SYSTEM DESIGN USING A LOW-COST RAPID CONTROL PROTOTYPING PLATFORM
    Franquiz, Francisco
    Hurst, Alecia
    Tang, Yan
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 5, 2014,
  • [8] Open source hardware based automated gardening system using low-cost soil moisture sensor
    Tripathy, A. K.
    Vichare, A.
    Pereira, R. R.
    Pereira, V. D.
    Rodrigues, J. A.
    [J]. 2015 INTERNATIONAL CONFERENCE ON TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT (ICTSD-2015), 2015,
  • [9] Design and Field Implementation of a Low-Cost, Open-Hardware Platform for Hydrological Monitoring
    Segovia-Cardozo, Daniel A.
    Rodriguez-Sinobas, Leonor
    Canales-Ide, Freddy
    Zubelzu, Sergio
    [J]. WATER, 2021, 13 (21)
  • [10] Dimensional Error in Rapid Prototyping with Open Source Software and Low-cost 3D-printer
    Rendon-Medina, Marco A.
    Andrade-Delgado, Laura
    Telich-Tarriba, Jose E.
    Fuente-del-Campo, Antonio
    Altamirano-Arcos, Carlos A.
    [J]. PLASTIC AND RECONSTRUCTIVE SURGERY-GLOBAL OPEN, 2018, 6 (01)
12345