Corrosion Behaviors and Mechanisms of ODS Steel Exposed to Static Pb-Bi Eutectic at 600 and 700°C

被引:7
|
作者
Bao Feiyang [1 ,2 ]
Li Yanfen [1 ,2 ,3 ]
Wang Guangquan [2 ,4 ]
Zhang Jiarong [2 ]
Yan Wei [1 ,2 ,3 ]
Shi Quanqiang [2 ,3 ]
Shan Yiyin [1 ,2 ,3 ]
Yang Ke [1 ,2 ]
Xu Bin [5 ]
Song Danrong [5 ]
Yan Mingyu [5 ]
Wei Xuedong [5 ]
机构
[1] Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
[2] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
[3] Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China
[4] Univ Sci & Technol China, Nano Sci & Technol Inst, Suzhou 215000, Peoples R China
[5] Nucl Power Inst China, Chengdu 610005, Peoples R China
基金
中国国家自然科学基金;
关键词
advanced nuclear energy system; Pb-Bi eutectic (LBE); oxide dispersion strengthened (ODS) steel; high temperature corrosion; oxide scale; LIQUID LEAD-BISMUTH; FE-9CR-1MO STEEL; HIGH-TEMPERATURE; OXIDATION MECHANISM; FERRITIC/MARTENSITIC STEELS; MODEL ALLOYS; OXYGEN; CHROMIUM; T91; FE;
D O I
10.11900/0412.1961.2020.00035
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
With good neutron properties, anti-irradiation performances, heat transfer properties and inherent safety characteristics, liquid lead or Pb-Bi eutectic (LBE) has been a primary candidate coolant for accelerator driven system and advanced nuclear reactors. However, corrosion of structural materials is a critical challenge in the use of liquid lead and LBE in high temperature nuclear reactors. Therefore, research on corrosion compatibility of structural materials with LBE at elevated temperatures is of great significance. In this work, the long-term corrosion experiments in static LBE for a oxide dispersion strengthened (ODS) steel were carried out at 600 and 700 degrees C. The temperature effects on different corrosion behaviors were studied by the analyses of XRD, SEM and EDS, and the underlying mechanisms were clarified. After exposing to LBE at 600 degrees C for up to 2000 h, a typical double-layer oxide scale with the thickness of about 10 mu m was formed on the surface of ODS steel, which was composed of outer layers of Pb-Fe-O and Fe3O4 and inner layer of Fe-Cr-Al spinal. In addition, a thin Al-rich layer was also formed under the inner layer. Due to the protective effect of the relatively dense inner layer and the Al-rich layer, ODS steel showed excellent resistance to LBE corrosion at 600 degrees C with a significantly lower corrosion rate. On the contrary, when exposed to LBE at 700 degrees C, the structure and thickness of the oxide scale formed on the surface of the ODS steel were obviously different. After exposure for 100 h, a dense protective Al2O3 oxide layer with a thickness of about 500 nm was formed, greatly reducing the corrosion rate. With the corrosion time prolonging to 500 h at 700 degrees C, most of Al2O3 layer was still remained. However, a few of nodular-like oxides were formed originated from local weak areas, which broken off the continuity of protective Al2O3 and led to deeper corrosion by LBE.
引用
收藏
页码:1366 / 1376
页数:11
相关论文
共 42 条
  • [1] Baker B W, 2014, MICROSC MICROANAL, V20, P1852
  • [2] An overview of corrosion issues for the design and operation of high-temperature lead- and lead-bismuth-cooled reactor systems
    Ballinger, RG
    Lim, J
    [J]. NUCLEAR TECHNOLOGY, 2004, 147 (03) : 418 - 435
  • [3] Fretting of fuel cladding materials for Pb cooled fast reactors-Approach to long term prediction using fretting maps
    Del Giacco, Mattia
    Weisenburger, Alfons
    Mueller, Georg
    [J]. NUCLEAR ENGINEERING AND DESIGN, 2014, 280 : 697 - 703
  • [4] A study on the Chinese nuclear energy options and the role of ADS reactor in the Chinese nuclear expansion
    Fiori, F.
    Zhou, Z.
    [J]. PROGRESS IN NUCLEAR ENERGY, 2016, 91 : 159 - 169
  • [5] Multiscale investigation of quasi-brittle fracture characteristics in a 9Cr-lMo ferritic-martensitic steel embrittled by liquid lead-bismuth under low cycle fatigue
    Gong, Xing
    Marmy, Pierre
    Volodin, Alexander
    Amin-Ahmadi, Behnam
    Qin, Ling
    Schryvers, Dominique
    Gavrilov, Serguei
    Stergar, Erich
    Verlinden, Bert
    Wevers, Martine
    Seefeldt, Marc
    [J]. CORROSION SCIENCE, 2016, 102 : 137 - 152
  • [6] GROMOV BF, 1995, LIQUID METAL SYSTEMS, P339
  • [7] Behaviour of pre-stressed T91 and ODS steels exposed to liquid lead-bismuth eutectic
    Hojna, Anna
    Hadraba, Hynek
    Di Gabriele, Fosca
    Husak, Roman
    [J]. CORROSION SCIENCE, 2018, 131 : 264 - 277
  • [8] Corrosion of ODS steels in lead-bismuth eutectic
    Hosemann, P.
    Thau, H. T.
    Johnson, A. L.
    Maloy, S. A.
    Li, N.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2008, 373 (1-3) : 246 - 253
  • [9] Stability domain of alumina thermally grown on Fe-Cr-Al-based model alloys and modified surface layers exposed to oxygen-containing molten Pb
    Jianu, A.
    Fetzer, R.
    Weisenburger, A.
    Doyle, S.
    Bruns, M.
    Heinzel, A.
    Hosemann, P.
    Mueller, G.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2016, 470 : 68 - 75
  • [10] Generation IV International Forum: A decade of progress through international cooperation
    Kelly, John E.
    [J]. PROGRESS IN NUCLEAR ENERGY, 2014, 77 : 240 - 246