EFFECT OF FIN PITCH AND HEIGHT ON PIN-FIN HEAT SINK PERFORMANCE

被引：0
|
作者：
Sahray, D. [1 ]
Shmueli, H. [1 ]
Segal, N. [1 ]
Ziskind, G. [1 ]
Letan, R. [1 ]
机构：
[1] Ben Gurion Univ Negev, Dept Mech Engn, Heat Transfer Lab, IL-84105 Beer Sheva, Israel
来源：
PROCEEDINGS OF THE 9TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS - 2008, VOL 4 | 2009年
关键词：
NATURAL-CONVECTION; RECTANGULAR FINS; HORIZONTAL BASE; VERTICAL BASE; PLATE;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In the present work, horizontal-base pin fin heat sinks exposed to free convection in air are studied. They are made of aluminum, and there is no contact resistance between the base and the fins. The sinks have the same base dimensions whereas the fin height and pitch vary. The fins have a constant square cross-section. The effect of fin height and pitch on the performance of the sink is studied experimentally and numerically. In the experiments, the heat sinks are heated using foil electrical heaters. The heat input is set, and temperatures of the base and fins are measured. In the corresponding numerical study, the sinks and their environment are modeled using the Fluent 6.3 software. The results show that heat transfer enhancement due to the fins is not monotonic. The differences between sparsely and densely populated sinks are analyzed for various fin heights.
引用
收藏
页码：199 / 205
页数：7
相关论文
共 50 条
  • [1] Numerical study of pin-fin heat sink with un-uniform fin height design
    Yang, Yue-Tzu
    Peng, Huan-Sen
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (19-20) : 4788 - 4796
  • [2] The Effect of Micro Pin-Fin Shape on the Heat Transfer Performance of Micro Pin-Fin Heat Sinks
    Koz, Mustafa
    Kosar, Ali
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE 2010), VOL 10, 2012, : 387 - 393
  • [3] The Effect of Micro Pin-Fin Shape on Thermal and Hydraulic Performance of Micro Pin-Fin Heat Sinks
    Izci, Turker
    Koz, Mustafa
    Kosar, Ali
    HEAT TRANSFER ENGINEERING, 2015, 36 (17) : 1447 - 1457
  • [4] Heat transfer intensification in pin-fin heat sink by changing pin-length/longitudinal-pitch
    Rezaee, M.
    Khoshvaght-Aliabadi, M.
    Arani, A. A. Abbasian
    Mazloumi, S. H.
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2019, 141
  • [5] PERFORMANCE OF RECTANGULAR PIN-FIN HEAT SINK SUBJECT TO AN IMPINGING AIR FLOW
    Mohammed, Adil Abbas
    Razuqi, Saad Abdulwahab
    JOURNAL OF THERMAL ENGINEERING, 2021, 7 (03): : 666 - 676
  • [6] Performance analysis of cold plate heat sink with parallel channel and pin-fin
    Pandey, Jyot
    Husain, Afzal
    Ansari, Mohd. Zahid
    Al-Azri, Nasser
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 3144 - 3149
  • [7] PIN-FIN HEAT SINK WITH HORIZONTAL BASE AND BLOCKED EDGES
    Sahray, D.
    Shmueli, H.
    Segal, N.
    Ziskind, G.
    Letan, R.
    HT2008: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE - 2008, VOL 2, 2009, : 693 - 698
  • [8] The Effect of a Piezoelectric Fan on Forced Air Heat Transfer in a Pin-Fin Heat Sink
    Jeng, Tzer-Ming
    Tzeng, Sheng-Chung
    Liu, Chi-Huang
    SMART SCIENCE, 2015, 3 (01): : 1 - 6
  • [9] Composite pin-fin heat sink for effective hotspot reduction
    Khan, Musthfa Ali
    Ali, Hafiz Muhammad
    Rehman, Tauseef-ur
    Arsalanloo, Akbar
    Niyas, Hakeem
    HEAT TRANSFER, 2024, 53 (04) : 1816 - 1838
  • [10] CHARACTERISTIC STUDY ON THE OPTIMIZATION OF PIN-FIN MICRO HEAT SINK
    John, T. J.
    Mathew, B.
    Hegab, H.
    IMECE 2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 9, PTS A-C, 2010, : 1373 - 1380
12345