Finite element modeling of plasticity-induced crack closure due to occasional mode II loading on mode I fatigue crack growth

Plasticity-induced fatigue crack closure associated with occasional mode II loading was simulated for two-dimensional middle-crack tension geometry by using the finite element method. When a single mode II cycle was superposed onto the steady-state mode I crack growth, the range of crack tip opening displacement, Delta CTOD, exhibited the initial drop and subsequent recovery under plane strain condition. On the other hand, under plane stress condition, Delta CTOD exhibited the initial jump and drop right after the single mode II loading, and then it showed the recovery. The present results indicate that occasional mode II loading can cause a small retardation for mode I crack growth due to the enhanced plasticity-induced closure. (C) 2013 Elsevier Ltd. All rights reserved.