Comparison of Multi-Axis Testing of the BARC Structure with Varying Boundary Conditions

The Box Assembly with Removable Component (BARC) structure was developed as a challenge problem for those investigating boundary conditions and their effect on structural dynamic tests. To investigate the effects of boundary conditions on the dynamic response of the Removable Component, it was tested in three configurations, each with a different fixture and thus a different boundary condition. A "truth" configuration test with the component attached to its next-level assembly (the Box) was first performed to provide data that multi-axis tests of the component would aim to replicate. The following two tests aimed to reproduce the component responses of the first test through multi-axis testing. The first of these tests is a more "traditional" vibration test with the removable component attached to a "rigid" plate fixture. A second set of these tests replaces the fixture plate with flexible fixtures designed using topology optimization and created using additive manufacturing. These two test approaches are compared back to the truth test to determine how much improvement can be obtained in a laboratory test by using a fixture that is more representative of the compliance of the component's assembly.