Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites

被引：208
|
作者：
Hao, Wenfeng [1 ,2 ]
Liu, Ye [1 ]
Zhou, Hao [3 ]
Chen, Haosen [2 ]
Fang, Daining [2 ]
机构：
[1] Jiangsu Univ, Fac Civil Engn & Mech, Zhenjiang 212013, Jiangsu, Peoples R China
[2] Beijing Inst Technol, Inst Adv Struct Technol, Beijing 100081, Peoples R China
[3] Beijing Inst Spacecraft Syst Engn, Beijing Key Lab Intelligent Space Robot Syst Tech, Beijing 100094, Peoples R China
来源：
POLYMER TESTING | 2018年 / 65卷
基金：
中国博士后科学基金; 中国国家自然科学基金;
关键词：
Thermosetting composites; 3D printing; Printed composites grid; Fused Deposition Modeling (FDM); Materials characterization; MECHANICAL-PROPERTIES; POLYMERS; STRENGTH; BEHAVIOR; TENSILE;
D O I：
10.1016/j.polymertesting.2017.11.004
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this study, continuous carbon-fiber reinforced thermosetting composites were prepared using 3D printing followed by characterization of their mechanical properties. First, a 3D printing platform was fabricated to prepare the composites based on Fused Deposition Modeling (FDM). Then, the composites lamina and grids were manufactured using a FDM-based platform. Finally, the mechanical properties of the composite lamina were characterized. The results showed that the mechanical performance of the 3D printed thermosetting composites was superior to that of similar 3D printed thermoplastic composites and 3D printed short carbon fiber reinforced composites.
引用
收藏
页码：29 / 34
页数：6
相关论文
共 50 条
  • [1] Mechanical characterization of 3D printed continuous carbon fiber reinforced thermoplastic composites
    Li, Lijun
    Liu, Wenyao
    Sun, Lingyu
    COMPOSITES SCIENCE AND TECHNOLOGY, 2022, 227
  • [2] Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
    Ming, Yueke
    Zhang, Shaoqiu
    Han, Wei
    Wang, Ben
    Duan, Yugang
    Xiao, Hong
    ADDITIVE MANUFACTURING, 2020, 33
  • [3] Thermal and Mechanical Characterization of 3D Printed Continuous Fiber Reinforced Composites
    Abbott, Andrew C.
    Furmanski, Jevan
    Tandon, G. P.
    Koerner, Hilmar
    Butcher, Dennis
    SAMPE JOURNAL, 2023, 59 (06) : 20 - 30
  • [4] Investigation on process window of 3D printed continuous glass fiber-reinforced thermosetting composites
    Najafloo, Behzad
    Rezadoust, Amir Masood
    Latifi, Masoud
    POLYMER COMPOSITES, 2024, 45 (01) : 448 - 460
  • [5] Fabrication of triangular corrugated structure using 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
    Wang, Ben
    Ming, Yueke
    Zhou, Jin
    Xiao, Hong
    Wang, Feng
    Duan, Yugang
    Kazanci, Zafer
    POLYMER TESTING, 2022, 106
  • [6] Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
    Tian, Xiaoyong
    Liu, Tengfei
    Wang, Qingrui
    Dilmurat, Abliz
    Li, Dichen
    Ziegmann, Gerhard
    JOURNAL OF CLEANER PRODUCTION, 2017, 142 : 1609 - 1618
  • [7] Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
    Tian, Xiaoyong
    Liu, Tengfei
    Yang, Chuncheng
    Wang, Qingrui
    Li, Dichen
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2016, 88 : 198 - 205
  • [8] An investigation into printing pressure of 3D printed continuous carbon fiber reinforced composites
    Zhang, Zhongsen
    Long, Yu
    Yang, Zhe
    Fu, Kunkun
    Li, Yan
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2022, 162
  • [9] 3D printed continuous carbon fiber reinforced PLA composites: A short review
    Valvez, S.
    Santos, P.
    Parente, J. M.
    Silva, M. P.
    Reis, P. N. B.
    1ST VIRTUAL CONFERENCE ON STRUCTURAL INTEGRITY (VCSI1), 2020, 25 : 394 - 399
  • [10] 3D Printed Composites with Continuous Carbon Fiber Reinforcements
    Sarvestani, Ali N.
    van de Werken, Nekoda
    Khanbolouki, Pouria
    Tehrani, Mehran
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017, VOL 2, 2018,
12345