Micro-Alloyed Steel for Forgings

被引：0
|
作者：
Mengaroni, Sabrina [1 ]
Calderini, Massimo [1 ]
Napoli, Giuseppe [2 ]
Zitelli, Chiara [2 ]
Di Schino, Andrea [2 ]
机构：
[1] AST, Viale B Brin, I-05100 Terni, Italy
[2] Univ Perugia UNIPG, Dept Engn, Via G Duranti 93, I-06125 Perugia, Italy
来源：
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2018年 / 941卷
关键词：
Steel; Vanadium; micro; alloying; HIGH-NITROGEN; BEHAVIOR;
D O I：
10.4028/www.scientific.net/MSF.941.1603
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To fulfill the industrial demand of forged steels with high tensile properties and microstructural requirements coupled with reduced cost, the possibility to increase the properties of C-Mn steels by means of precipitation strengthening as achieved by micro-alloying (and without the addition of expensive elements such as Mo and Cr) has been evaluated. In order to do that, the effect of V addition has been exploited by means of metallurgical modelling followed by a laboratory ingot manufacturing. Heat treatment has been designed aimed to achieve the desired target tensile properties. Results show that ASTM A694 F70 grade requirements can bel fulfilled by 0.15% V addition and a proper heat treatment in a ferrite-pearlite microstructure, representative of a forged component. Results are discussed in comparison to those of a similar steel without V addition.
引用
收藏
页码：1603 / 1606
页数：4
相关论文
共 50 条
  • [1] THERMOMECHANICAL TREATMENT OF Ti-Nb-V-B MICRO-ALLOYED STEEL FORGINGS
    Opiela, Marek
    [J]. MATERIALI IN TEHNOLOGIJE, 2014, 48 (04): : 587 - 591
  • [2] MICRO-ALLOYED STEEL FOR CASTING
    WELLNER, P
    MUKHERJEE, A
    MAYER, H
    [J]. FONDERIE, 1977, 32 (370): : 285 - 290
  • [3] Vanadium micro-alloyed steels for forgings: Metallurgical design and properties
    Calderini, Massimo
    Mengaroni, Sabrina
    Di Schino, Andrea
    Napoli, Giuseppe
    Zitelli, Chiara
    [J]. Metallurgia Italiana, 2019, 111 (09): : 33 - 37
  • [4] Metallurgical design of micro-alloyed high strength steels for forgings
    Zitelli, Chiara
    Mengaroni, Sabrina
    Napoli, Giuseppe
    Richetta, Maria
    Di Schino, Andrea
    [J]. METALLURGICAL RESEARCH & TECHNOLOGY, 2017, 114 (06)
  • [5] THERMOMECHANICAL PROCESSING OF MICRO-ALLOYED STEEL
    Podany, Pavel
    Martinek, Petr
    [J]. MATERIALI IN TEHNOLOGIJE, 2014, 48 (06): : 855 - 859
  • [6] Mechanical Properties of Micro-alloyed TRIP Steel
    Jung, Jaehyuk
    Kim, Sungil
    De Cooman, B. C.
    [J]. PRICM 7, PTS 1-3, 2010, 654-656 : 242 - +
  • [7] Calculation of hardness distribution in the HAZ of micro-alloyed steel
    M. Rahman
    W. Maurer
    W. Ernst
    R. Rauch
    N. Enzinger
    [J]. Welding in the World, 2014, 58 : 763 - 770
  • [8] THE OPTIMISATION OF TITANIUM AND NITROGEN CONCENTRATION IN MICRO-ALLOYED STEEL
    Podorska, D.
    Wypartowicz, J.
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2009, 54 (03) : 823 - 828
  • [9] A micro-alloyed ferritic steel strengthened by nanoscale precipitates
    Shen, Y. F.
    Wang, C. M.
    Sun, X.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (28): : 8150 - 8156
  • [10] CYCLIC BEHAVIOR OF A MEDIUM CARBON MICRO-ALLOYED STEEL
    MARTIN, F
    PETIT, J
    DEFOUQUET, J
    [J]. MATERIALS SCIENCE AND ENGINEERING, 1983, 61 (03): : 237 - 246
12345