Hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts

被引：0
|
作者：
Grzesik, W [1 ]
Wanat, T [1 ]
机构：
[1] Tech Univ Opole, Dept Mfg Engn & Prod Automat, Opole, Poland
来源：
TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005 | 2005年 / 33卷
关键词：
hard turning; surface roughness; cutting tool geometry;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents some original research into the surface roughness produced in the turning of a low chromium alloy steel, heat treated to about 60 HRC (Rockwell hardness) with mixed alumina- titanium carbon (TiC) ceramic cutting tools equipped with both conventional (single radius) and wiper (multi-radius) inserts. The characteristic geometrical features of surfaces obtained in both these turning operations have been assessed by means of 2D surface roughness parameters such as Ra, Rz, RSm, R Delta q, R lambda q, Rmr(c), Rsk and Rku, and some 3D equivalents, which allowed more complete characterization of the surface topography and its service properties.
引用
收藏
页码：9 / 16
页数：8
相关论文
共 50 条
  • [1] Surface finish generated in hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts
    Grzesik, W.
    Wanat, T.
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (15): : 1988 - 1995
  • [2] Neural network process modelling for turning of steel parts using conventional and wiper inserts
    Oezel, Tugrul
    Correia, A. Esteves
    Davim, J. Paulo
    [J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2009, 35 (1-2): : 246 - 258
  • [3] Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear
    Aouici, H.
    Elbah, M.
    Yallese, M. A.
    Fnides, B.
    Meddour, I.
    Benlahmidi, S.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (5-8): : 2221 - 2244
  • [4] Performance comparison of wiper and conventional ceramic inserts in hard turning of AISI 4140 steel: analysis of machining forces and flank wear
    H. Aouici
    M. Elbah
    M. A. Yallese
    B. Fnides
    I. Meddour
    S. Benlahmidi
    [J]. The International Journal of Advanced Manufacturing Technology, 2016, 87 : 2221 - 2244
  • [5] Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts
    Gaitonde, V. N.
    Karnik, S. R.
    Figueira, Luis
    Davim, J. Paulo
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (04): : 754 - 763
  • [6] Performance comparison of conventional and wiper ceramic inserts in hard turning through artificial neural network modeling
    Gaitonde, Vinayak Neelakanth
    Karnik, S. R.
    Figueira, Luis
    Davim, J. Paulo
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (1-4): : 101 - 114
  • [7] Performance comparison of conventional and wiper ceramic inserts in hard turning through artificial neural network modeling
    Vinayak Neelakanth Gaitonde
    S. R. Karnik
    Luis Figueira
    J. Paulo Davim
    [J]. The International Journal of Advanced Manufacturing Technology, 2011, 52 : 101 - 114
  • [8] Investigations into hard turning process using wiper tool inserts
    Kumar, Amardeep
    Pradhan, S. K.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 12579 - 12587
  • [9] Performance of conventional and wiper CBN inserts under various cooling conditions in hard turning of AISI 52100 steel
    Cetindag, Huseyin Alp
    Cicek, Adem
    Ucak, Necati
    Aslantas, Kubilay
    [J]. MATERIALS TESTING, 2024, 66 (02) : 288 - 298
  • [10] Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steel
    Elbah, Mohamed
    Yallese, Mohamed Athmane
    Aouici, Hamdi
    Mabrouki, Tarek
    Rigal, Jean-Francois
    [J]. MEASUREMENT, 2013, 46 (09) : 3041 - 3056
12345