Cavitation erosion testing of different cavitation-resistent materials and coatings using the cavitating jet method

被引：0
|
作者：
Rudolf, Pavel [1 ]
Julis, Martin [2 ]
Klakurkova, Lenka [2 ]
Gejdos, Pavel [2 ]
Hudec, Martin [1 ]
机构：
[1] Brno Univ Technol, V Kaplan Dept Fluid Engn, Fac Mech Engn, Tech 2896-2, Brno, Czech Republic
[2] Brno Univ Technol, Cent European Inst Technol, Purkynova 123, Brno, Czech Republic
来源：
29TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS | 2019年 / 240卷
关键词：
D O I：
10.1088/1755-1315/240/6/062057
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
An experimental test circuit was built with submerged nozzle with diameter 1.2 mm and inlet pressure 200 bar. Several specimens of different cavitation resistant materials used for hydraulic turbines (e.g. 13Cr4Ni) and coatings (e.g. tungsten and chromium carbides) were tested. Cavitating jet tests proved to be very efficient, sufficient cavitation erosion was obtained within 90 minutes. Comparisons between different materials were based on microscopic mapping of the eroded surfaces and SEM visualizations. Finally comparison between cavitating jet test and hydrodynamic cavitation tests using the orifice is presented. Duplex steel weld deposit proved to be the most cavitation resistant material
引用
收藏
页数：10
相关论文
共 50 条
  • [1] A systematic study into the cavitation erosion test for marine propeller materials by cavitating jet technique
    Usta, Onur
    Koksal, Cagatay Sabri
    Korkut, Emin
    OCEAN ENGINEERING, 2023, 284
  • [2] Effect of nozzle geometry on a standard cavitation erosion test using a cavitating jet
    Soyama, Hitoshi
    WEAR, 2013, 297 (1-2) : 895 - 902
  • [3] USE OF A SIMPLE CAVITATING NOZZLE FOR CAVITATION EROSION TESTING AND CUTTING
    LICHTAROWICZ, A
    NATURE-PHYSICAL SCIENCE, 1972, 239 (91): : 63 - +
  • [4] Cavitation intensity and erosion pattern of a self-excited cavitating jet
    Pan, Yan
    Ma, Fei
    Liu, Boshen
    Cai, Tengfei
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 282
  • [5] ASSESSING CAVITATION EROSION ON SOLID SURFACES USING A CAVITATION JET APPARATUS
    Mohammadizadeh, S. M.
    Dalfre Filho, J. G.
    Descovi, C. S.
    Murillo-Bermudez, L. F.
    Sierra, D. A.
    Corzo, G.
    HOLOS, 2023, 39 (05)
  • [6] INFLUENCE OF TESTING PARAMETERS OF CAVITATION EROSION OF MATERIALS
    MILICHENKO, SL
    ALEKSANDROV, AG
    PINKOVSK.IV
    INDUSTRIAL LABORATORY, 1970, 36 (08): : 1248 - +
  • [7] COMPARISON OF TUNNEL AND JET METHODS FOR CAVITATION EROSION TESTING
    COLEMAN, SL
    SCOTT, VD
    MCENANEY, B
    ANGELL, B
    STOKES, KR
    WEAR, 1995, 184 (01) : 73 - 81
  • [8] Comparison of cavitation erosion test results between vibratory and cavitating jet methods
    Yamaguchi, A.
    Kazama, T.
    Inoue, K.
    Onoue, J.
    Fluid Power Journal, 2001, 8 (06):
  • [9] Erosion experiments of shale using a cavitation jet
    Chi, Peng
    Shilong, Zhang
    Jianhong, Fu
    Qinfeng, Li
    Yu, Su
    Hao, Chang
    Yuxuan, Chen
    Yun, Yang
    OCEAN ENGINEERING, 2022, 261
  • [10] The relation between the high speed submerged cavitating jet behaviour and the cavitation erosion process
    Hutli, Ezddin
    Nedeljkovic, Milos S.
    Radovic, Nenad A.
    Bonyar, Attila
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2016, 83 : 27 - 38
12345