Effects of the single layer CVD SiC interphases on the mechanical properties of the C/SiC composites fabricated by PIP process

被引:29
|
作者
Xiang Yang [1 ]
Li Wei [1 ]
Wang Song [1 ]
Chen Zhao-hui [1 ]
机构
[1] Natl Univ Def Technol, Natl Key Lab Sci & Technol Adv Ceram Fibers & Com, Coll Aerosp & Mat Engn, Changsha 410073, Hunan, Peoples R China
基金
中国国家自然科学基金;
关键词
Mechanical characterization; Composites; Chemical vapor deposition; Oxidation; Interfaces; CARBON; MICROSTRUCTURE; PYROLYSIS;
D O I
10.1016/j.msea.2012.08.026
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Owing to the degradation of the mechanical properties of carbon fiber reinforced SiC matrix (C/SiC) composites under oxidation environment and high-temperature annealing, single layer SiC interphases prepared by chemical vapor deposition (CVD) process were employed. Effects of the CVD SiC interphases on the mechanical properties and oxidation resistance of the C/SiC composites fabricated by precursor infiltration and pyrolysis (PIP) process were investigated. Uniform and smooth beta-SiC fiber coating about 1.3 mu m thick was deposited on carbon fibers by CVD process. Compared with the as-received C/SiC composites, the composites with SiC interphases exhibited an obvious toughened fracture behavior after high-temperature annealing, which were advantageous of the improvement of the mechanical properties of C/SiC composites. The oxidation resistance of composites with CVD-SiC interphases was much better than that of composites without interphase. Crown Copyright (C) 2012 Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:451 / 455
页数:5
相关论文
共 50 条
  • [1] Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process
    Liu, Haitao
    Cheng, Haifeng
    Wang, Jun
    Tang, Gengping
    CERAMICS INTERNATIONAL, 2010, 36 (07) : 2033 - 2037
  • [2] Effects of CVD SiBCN interphases on mechanical and dielectric properties of SiCf/SiC composites fabricated via a PIP process
    Sun, Xun
    Liu, Haitao
    Li, Junsheng
    Cheng, Haifeng
    CERAMICS INTERNATIONAL, 2016, 42 (01) : 82 - 89
  • [3] Mechanical properties of SiC/SiC composites fabricated by PIP process with a new precursor polymer
    Luo, Zheng
    Zhou, Xingui
    Yu, Jinshan
    Sun, Ke
    Wang, Fei
    CERAMICS INTERNATIONAL, 2014, 40 (01) : 1939 - 1944
  • [4] Effects of the single layer CVD SiC interphases on mechanical properties of mullite fiber-reinforced mullite matrix composites fabricated via a sol-gel process
    Wang, Yi
    Cheng, Haifeng
    Wang, Jun
    CERAMICS INTERNATIONAL, 2014, 40 (03) : 4707 - 4715
  • [5] Effect of heat treatment on the mechanical properties of PIP-SiC/SiC composites fabricated with a consolidation process
    Zhao, Shuang
    Zhou, Xingui
    Yu, Jinshan
    CERAMICS INTERNATIONAL, 2014, 40 (03) : 3879 - 3885
  • [6] Mechanical and dielectric properties of SiCf/SiC composites fabricated by PIP combined with CIP process
    Hu, Yang
    Luo, Fa
    Duan, Shichang
    Zhou, Wancheng
    Zhu, Dongmei
    CERAMICS INTERNATIONAL, 2016, 42 (06) : 6800 - 6806
  • [7] Mechanical and Dielectric Properties of Mullite Fiber-Reinforced Mullite Matrix Composites with Single Layer CVD SiC Interphases
    Wang, Yi
    Cheng, Haifeng
    Wang, Jun
    International Journal of Applied Ceramic Technology, 2015, 12 (03) : 500 - 509
  • [8] Effects of Carbon Fiber CVD SiC Coatings on Mechanical Properties of C/SiC Composites
    Zhou Xingui
    You Yu
    Yu Haijiao
    Yang Jiangao
    Huang Zelan
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 : 32 - 35
  • [9] Microstructures and mechanical properties of CVD-SiC coated PIP-C/SiC composites under high temperature
    Xiang Yang
    Li Wei
    Wang Song
    Zhang Bi-feng
    Chen Zhao-hui
    SURFACE & COATINGS TECHNOLOGY, 2012, 209 : 197 - 202
  • [10] Mechanical and electromagnetic shielding properties of SiCf/SiC composites fabricated by combined CVI and PIP process
    Mu, Yang
    Zhou, Wancheng
    Wang, Chao
    Luo, Fa
    Zhu, Dongmei
    Ding, Donghai
    CERAMICS INTERNATIONAL, 2014, 40 (07) : 10037 - 10041