Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness

被引：4
|
作者：
Darmawan, Agung Setyo [1 ]
Febriantoko, Bambang Waluyo [1 ]
Anggono, Agus Dwi [1 ]
Riyadi, Tri Widodo Besar [1 ]
Hamid, Abdul [2 ]
机构：
[1] Univ Muhammadiyah Surakarta, Fac Engn, Dept Mech Engn, Jl Ahmad Yani,Tromol Pos 1 Pabelan, Surakarta 57162, Indonesia
[2] Univ Batam, Fac Engn, Dept Mech Engn, Batam 29464, Indonesia
来源：
4TH ENGINEERING SCIENCE AND TECHNOLOGY INTERNATIONAL CONFERENCE (ESTIC 2018) | 2018年 / 248卷
关键词：
EVOLUTION; ALLOY; DEFORMATION; TITANIUM; TEXTURE; STEEL;
D O I：
10.1051/matecconf/201824801001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Brass is an alloy between copper (Cu) and zinc (Zn) where the majority of the elements are copper. Brass that undergoes a cold rolling process will experience changes in microstructure and mechanical properties. This study aims to find out the effect of cold rolling process on changes in microstructure and hardness of brass. The composition of brass is analyzed by using Energy Dispersive Spectroscopy technique, while microscope optic is used to obtain microstructure photograph of brass. The hardness of brass is measured before and after cold rolling process. The test results show that cold rolling process causes the increase of hardness on brass, change of grain shape, and the appearance of deformation bands on brass.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire
    Pasoodeh, Behzad
    Parvizi, Ali
    Akbari, Hamid
    JOURNAL OF COMPUTATIONAL APPLIED MECHANICS, 2018, 49 (01): : 143 - 148
  • [2] Effect of Intermediate Annealing on Microstructure and Cold Rolling Hardness of AlFeMn Alloy
    Pan, Yanfeng
    Shen, Yifu
    Cao, Lingyong
    METALS, 2024, 14 (07)
  • [3] Effect of cold rolling on microstructure and hardness of annealed Al-Cu-Mg alloy
    Liu, Fei
    Liu, Zhiyi
    He, Guangyu
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2022, 22 (02)
  • [4] The Effect of Rolling Reduction on the Microstructure Evolution and Slip Behavior of Ta-10W Alloy during Cold Rolling Process
    Park, Ki-Seong
    Kaushik, Lalit
    Yoo, Hyo-Sang
    Jeon, Jae-Yeol
    Choi, Shi-Hoon
    KOREAN JOURNAL OF METALS AND MATERIALS, 2024, 62 (06): : 429 - 444
  • [5] THE EFFECT OF BENDING AND STRAIGHTENING ON ROLLING TEXTURE AND MICROSTRUCTURE IN BRASS
    LEFFERS, T
    JENSEN, DJ
    SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (12): : 2431 - 2435
  • [6] Effects of thickness reduction in cold rolling process on the formability of sheet metals using ANFIS
    Xie, Yichen
    Wu, Yuping
    Jalali, Arman
    Zhou, Huajie
    Khadimallah, Mohamed Amine
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [7] Effects of thickness reduction in cold rolling process on the formability of sheet metals using ANFIS
    Yichen Xie
    Yuping Wu
    Arman Jalali
    Huajie Zhou
    Mohamed Amine Khadimallah
    Scientific Reports, 12
  • [8] Thickness Draft Schedule through Hot and Cold Flat Rolling for Cartridge Brass Alloys
    El-Bitar, Taher
    El-Meligy, Maha
    Hakim, Heba Abdel
    World of Metallurgy - ERZMETALL, 2023, 76 (01): : 35 - 41
  • [9] COLD ROLLING OF SMALL BRASS GEARS
    PROSKURY.YG
    MASLOV, GV
    RUSSIAN ENGINEERING JOURNAL-USSR, 1966, 46 (10): : 74 - &
  • [10] Investigation of Symmetric and Asymmetric Cold Rolling on Steel Strip Microstructure Formation and Hardness
    A. V. Kozhevnikov
    M. M. Skripalenko
    S. O. Rogachev
    K. P. Korepina
    I. A. Kozhevnikova
    M. N. Skripalenko
    B. A. Romantsev
    A. V. Danilin
    Metallurgist, 2023, 67 : 442 - 451
12345