In-Situ Characterization of Deformation and Fracture Behavior of Hot-Rolled Medium Manganese Lightweight Steel

被引：7
|
作者：
Zhao, Zheng-zhi [1 ]
Cao, Rong-hua [1 ]
Liang, Ju-hua [1 ]
Li, Feng [1 ]
Li, Cheng [1 ]
Yang, Shu-feng [2 ]
机构：
[1] Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China
[2] Univ Sci & Technol Beijing, Sch Met & Ecol Engn, Beijing 100083, Peoples R China
来源：
JOM | 2018年 / 70卷 / 05期
基金：
中国国家自然科学基金;
关键词：
MEDIUM-MN STEEL; MICROSTRUCTURE; FERRITE; ALUMINUM; AL;
D O I：
10.1007/s11837-018-2790-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The deformation and fracture behavior of hot-rolled medium manganese lightweight (0.32C-3.85Mn-4.18Al-1.53Si) steel was revealed by an in situ tensile test. Deformed delta-ferrite with plenty of cross-parallel deformation bands during in situ tensile tests provides delta-ferrite of good plasticity and ductility, although it is finally featured by the cleavage fracture. The soft and ductile delta-ferrite and high-volume fraction of austenite contribute to the superior mechanical properties of medium manganese lightweight steel heated at 800A degrees C, with a tensile strength of 924 MPa, total elongation of 35.2% and product of the strength and elongation of 32.5 GPa %.
引用
收藏
页码：700 / 705
页数：6
相关论文
共 50 条
  • [1] In-Situ Characterization of Deformation and Fracture Behavior of Hot-Rolled Medium Manganese Lightweight Steel
    Zheng-zhi Zhao
    Rong-hua Cao
    Ju-hua Liang
    Feng Li
    Cheng Li
    Shu-feng Yang
    JOM, 2018, 70 : 700 - 705
  • [2] Microstructure and deformation behavior of the hot-rolled medium manganese steels with varying aluminum-content
    Cai, Z. H.
    Cai, B.
    Ding, H.
    Chen, Y.
    Misra, R. D. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 676 : 263 - 270
  • [3] Impact and Rolling Abrasive Wear Behavior and Hardening Mechanism for Hot-Rolled Medium-Manganese Steel
    Wang, Jian
    Wang, Qingliang
    Zhang, Xiao
    Zhang, Dekun
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (03):
  • [4] Study on Carbide Precipitation Behavior and Microstructure and Mechanical Property of Intercritically Annealed Hot-rolled Medium Manganese Steel
    Tian Y.
    Li W.
    Zheng X.
    Song J.
    Wei Y.
    Chen L.
    Cailiao Daobao/Materials Reports, 2019, 33 (08): : 2765 - 2770
  • [5] Effect of Coiling Temperature on Microstructure and Tensile Behavior of a Hot-Rolled Ferritic Lightweight Steel
    Junfeng Wang
    Qi Yang
    Xiaodong Wang
    Li Wang
    Metallurgical and Materials Transactions A, 2016, 47 : 5918 - 5931
  • [6] Microstructural and textural characterization of a hot-rolled IF steel
    Jefferson Fabrício Cardoso Lins
    Hugo Ricardo Z. Sandim
    Hans-Jürgen Kestenbach
    Journal of Materials Science, 2007, 42 : 6572 - 6577
  • [7] Effect of Coiling Temperature on Microstructure and Tensile Behavior of a Hot-Rolled Ferritic Lightweight Steel
    Wang, Junfeng
    Yang, Qi
    Wang, Xiaodong
    Wang, Li
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (12): : 5918 - 5931
  • [8] Understanding Hot vs. Cold Rolled Medium Manganese Steel Deformation Behavior Using In Situ Microscopic Digital Image Correlation
    Dutta, Aniruddha
    Ponge, Dirk
    Sandloebes, Stefanie
    Raabe, Dierk
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 198 - 205
  • [9] Microstructural and textural characterization of a hot-rolled IF steel
    Cardoso Lins, Jefferson Fabricio
    Sandim, Hugo Ricardo Z.
    Kestenbach, Hans-Juergen
    JOURNAL OF MATERIALS SCIENCE, 2007, 42 (16) : 6572 - 6577
  • [10] EFFECT OF INCLUSIONS ON BRITTLE FRACTURE OF HOT-ROLLED STEEL
    BUCHER, JH
    JOURNAL OF MATERIALS, 1967, 2 (02): : 432 - &
12345