Effects of heat treatment on microstructure and mechanical properties of Mg-5Zn-0.63Er alloy

被引：17
|
作者：
Zhao, Xian-feng [1 ]
Li, Shu-bo [1 ]
Wang, Qing-feng [1 ]
Du, Wen-bo [1 ]
Liu, Ke [1 ]
机构：
[1] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing 100124, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2013年 / 23卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Mg-5Zn-0.63Er alloy; rare earth; Er; heat treatment; microstructure; mechanical properties; ZN-Y ALLOYS; QUASI-CRYSTAL; MG; PHASE; BEHAVIOR; MAGNESIUM;
D O I：
10.1016/S1003-6326(13)62429-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The microstructure evolution of the Mg-5Zn-0.63Er (mass fraction, %) alloy containing quasicrystalline phase (I-phase) under the as-cast condition was investigated via different heat treatments. The results show that apart from the precipitation of the W-phase particles, the I-phase almost dissolves into the matrix after solid solution treatment at 480 degrees C for 10 h (T4 state). The solution-treated alloy was aged at 175 degrees C for 6-100 h (T6 state). The ultimate tensile strength of the peak-aged alloy is approximately 261 MPa companying with an elongation of 10.5%. The improvement of the tensile strength is mainly attributed to the presence of the rod-like MgZn2 particles.
引用
收藏
页码：59 / 65
页数：7
相关论文
共 50 条
  • [1] Effects of ultrasonic treatment on microstructure and mechanical properties of Mg-5Zn-2Er alloy
    Wang Zhao-hui
    Wang Xu-dong
    Wang Qing-feng
    Du Wen-bo
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (04) : 773 - 777
  • [2] Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu-Er Alloy
    Kord, S.
    Alipour, Mohammad
    Siadati, M. H.
    Kord, Masumeh
    Koppad, Praveennath G.
    LIGHT METALS 2018, 2018, : 451 - 459
  • [3] Effects of heat treatment on microstructure and properties of extruded Mg-Er alloy
    School of Materials Science and Engineering, Shenyang Aerospace University, Shenyang, China
    Cailiao Rechuli Xuebao, 11 (29-34):
  • [4] Effects of Heat Treatment on Microstructure and Mechanical Properties of an ECAPed Al-Zn-Mg-Cu Alloy
    Li, Jinghui
    Li, Fuguo
    Ma, Xinkai
    Li, Jiang
    Liang, Shan
    Zhang, Long
    ADVANCED ENGINEERING MATERIALS, 2018, 20 (09)
  • [5] Effects of trace Er addition on the microstructure and mechanical properties of Mg-Zn-Zr alloy
    Zhang, Jing
    Ma, Qi
    Pan, Fusheng
    MATERIALS & DESIGN, 2010, 31 (09): : 4043 - 4049
  • [6] Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5Zn-1Mn Alloy Tube
    Li, Lianhui
    Cao, Hongshuai
    Qi, Fugang
    Wang, Qing
    Zhao, Nie
    Liu, Yingdu
    Ye, Xue
    Ouyang, Xiaoping
    METALS, 2020, 10 (03)
  • [7] Effects of heat treatment process on microstructure and mechanical properties of Mg-5Zn-xEr alloys
    Li, Shubo
    Zhao, Xianfeng
    Liu, Ke
    Wang, Zhaohui
    Du, Wenbo
    THIRD INTERNATIONAL CONFERENCE ON SMART MATERIALS AND NANOTECHNOLOGY IN ENGINEERING, 2012, 8409
  • [8] Effects of heat treatment on microstructure, mechanical properties and damping capacity of Mg-Zn-Y-Zr alloy
    Yan, Bangsong
    Dong, Xuanpu
    Ma, Rong
    Chen, Shuqun
    Pan, Zhang
    Ling, Hongjiang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 594 : 168 - 177
  • [9] Effects of mg content and heat treatment on the microstructure and mechanical properties of rolled Al-Zn-Sc alloy
    Ge, Z. J.
    Liu, C. Y.
    Huang, H. F.
    Cheng, W.
    MATERIALS CHARACTERIZATION, 2021, 173 (173)
  • [10] Effects of Heat Treatment on Microstructure and Mechanical Properties of As-extruded Mg-Zn-Y-Zr Alloy
    Wang Dayu
    Du Zhiming
    Zhang Hongjuan
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (11) : 3345 - 3352
12345