Ultra rapid softening of high strength structural steels by thermomechanical treatment

被引：0

作者：

Adachi, Yoshitaka ^{[1
]}

Tsuzaki, Kaneaki ^{[1
]}

机构：

[1] Natl Inst Mat Sci, Steel Res Ctr, 1-2-1 Sengen, Tsukuba, Ibaraki 3050047, Japan

来源：

THERMEC 2006, PTS 1-5 | 2007年 / 539-543卷

关键词：

softening; spheroidizing; cementite; high strength steel; thermomechanical treatment;

D O I：

10.4028/www.scientific.net/MSF.539-543.4807

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study aims to shorten the softening treatment period as possible in high strength structural steels. The steel used is SCM440 steel. As an initial microstructure, martensite, bainite, pearlite and complicated microstructure consisting of ultrafine polygonal, martensite and equiaxed cementite were extensively examined to understand their softening process on aging at 973K. These initial microstructures were prepared by heat or thermomechanical treatment. Their initial Vickers hardness (Hv(10kgt)) were 634, 281, 219 and 238, respectively. It is noteworthy that within five minutes on aging hardness of the complicated microstructure reached lower than Hv200, while it took more than several hours for other initial microstructures. A quantitative evaluation of microstructures appears to help in understanding the mechanism of the softening kinetics.

引用

页码：4807 / +

页数：2

共 50 条

[1] THERMOMECHANICAL TREATMENT OF HIGH-STRENGTH STRUCTURAL-STEELS
BERNSTEJN, ML
DERKACEVA, SN
ODESSKIJ, PD
NEUE HUTTE, 1978, 23 (09): : 341 - 344
[2] RUPTURE STRENGTH OF STRUCTURAL-STEELS AFTER THERMOMECHANICAL TREATMENT
BOLSHAKOV, VI
RYCHAGOV, VN
METAL SCIENCE AND HEAT TREATMENT, 1990, 32 (9-10) : 752 - 759
[3] STRUCTURAL-STEELS - OBTAINING HIGH-STRENGTH WELDABLE STEELS WITH BAINITE STRUCTURE USING THERMOMECHANICAL TREATMENT
EFRON, LI
LITVINENKO, DA
METAL SCIENCE AND HEAT TREATMENT, 1994, 36 (9-10) : 532 - 538
[4] Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels
Esterl, Raphael
Sonnleitner, Markus
Schnitzer, Ronald
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (07): : 3238 - 3245
[5] Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels
Raphael Esterl
Markus Sonnleitner
Ronald Schnitzer
Metallurgical and Materials Transactions A, 2019, 50 : 3238 - 3245
[6] Design of high-strength steels by microalloying and thermomechanical treatment
Barani, A. Ardehali
Li, F.
Romano, P.
Ponge, D.
Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 463 (1-2): : 138 - 146
[7] PRODUCTION OF HIGH-STRENGTH STRUCTURAL-STEELS BY THERMOMECHANICAL STRENGTHENING TECHNIQUES
BERNSHTEIN, ML
ODESSKII, PD
DERKACHEVA, SN
STEEL IN THE USSR, 1976, 6 (07): : 404 - 406
[8] WAYS TO INCREASE STRENGTH OF STEELS BY THERMOMECHANICAL TREATMENT
ROSE, A
HOUGARDY, HP
ZEITSCHRIFT FUR METALLKUNDE, 1967, 58 (11): : 747 - &
[9] Thermomechanical processing of advanced high strength steels
Zhao, Jingwei
Jiang, Zhengyi
PROGRESS IN MATERIALS SCIENCE, 2018, 94 : 174 - 242
[10] HIGH-STRENGTH STRUCTURAL-STEELS WITH A STRUCTURE OF LOW-CARBON BAINITE SUBJECTED TO THERMOMECHANICAL TREATMENT
LAUPRECHT, W
IMGRUND, H
COLDREN, P
METAL SCIENCE AND HEAT TREATMENT, 1975, 17 (11-1) : 1005 - 1011

← 1 2 3 4 5 →