Adsorbent coatings for heat pumping applications: Verification of hydrothermal and mechanical stabilities

被引：66

作者：

Freni, Angelo ^{[1
]}

Frazzica, Andrea ^{[1
]}

Dawoud, Belal ^{[2
]}

Chmielewski, Stefanie ^{[2
]}

Calabrese, Luigi ^{[3
]}

Bonaccorsi, Lucio ^{[3
]}

机构：

[1] CNR Ist Tecnol Avanzate Energia Nicola Giordano, Via Salita S Lucia Contesse 5, I-98126 Messina, Italy

[2] Viessmann Werke Allendorf GmbH, D-35107 Allendorf, Eder, Germany

[3] Univ Messina, Dept Ind Chem & Mat Engn, Fac Engn, I-98166 Messina, Italy

来源：

APPLIED THERMAL ENGINEERING | 2013年 / 50卷 / 02期

关键词：

Adsorption heat pump; Adsorbent coating; Hydrothermal stability; Mechanical stability; WATER-ADSORPTION; KINETICS; VAPOR;

D O I：

10.1016/j.applthermaleng.2011.07.010

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper presents novel experimental methods for verification of both hydrothermal and mechanical stabilities of adsorbent coatings. Experiments have been carried out on zeolite-based coatings over aluminum substrates, prepared by a dip-coating technique developed at CNR-ITAE. Hydrothermal aging of several adsorbent coatings is ongoing. Adsorption and structural stability of some samples under test was successfully verified after 35000 aging cycles by isobars measurement and XRD analysis. Mechanical properties of coatings have been evaluated by applying different typologies of static and dynamic mechanical stresses. Results obtained have been compared with those achieved by subjecting adsorbent coatings prepared by Mitsubishi Plastic Incorporation (MPI) to the same characterization protocol. The comparison between the two types of coating returned that MPI coatings posses similar thermal stability and better mechanical strength than CNR-ITAE coatings. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1658 / 1663

页数：6

共 50 条

[1] ADSORBENT COATINGS FOR HEAT PUMPING APPLICATIONS: VERIFICATION OF HYDROTHERMAL AND MECHANICAL STABILITIES
Freni, Angelo
Frazzica, Andrea
Dawoud, Belal
Chmielewski, Stefanie
Bonaccorsi, Lucio
PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON INNOVATIVE MATERIALS FOR PROCESSES IN ENERGY SYSTEMS 2010 (IMPRES2010): FOR FUEL CELLS, HEAT PUMPS AND SORPTION SYSTEMS, 2010, : 60 - 66
[2] Hydrothermal stability of adsorbent coatings
SpringerBriefs in Applied Sciences and Technology, 2015, 117 : 55 - 79
[3] Mechanical stability of adsorbent coatings
SpringerBriefs in Applied Sciences and Technology, 2015, 117 : 81 - 96
[4] Mechanical and hydrothermal stabilities of aged periodic mesoporous organosilicas
Burleigh, MC
Markowitz, MA
Jayasundera, S
Spector, MS
Thomas, CW
Gaber, BP
JOURNAL OF PHYSICAL CHEMISTRY B, 2003, 107 (46): : 12628 - 12634
[5] Hydrothermal and microwave synthesis of SAPO (CHA) zeolites on aluminium foams for heat pumping applications
Bonaccorsi, Lucio
Calabrese, Luigi
Freni, Angelo
Proverbio, Edoardo
MICROPOROUS AND MESOPOROUS MATERIALS, 2013, 167 : 30 - 37
[6] Development and characterization of silane-zeolite adsorbent coatings for adsorption heat pump applications
Calabrese, L.
Brancato, V.
Bonaccorsi, L.
Frazzica, A.
Capri, A.
Freni, A.
Proverbio, E.
APPLIED THERMAL ENGINEERING, 2017, 116 : 364 - 371
[7] Verification of hydrothermal stability of adsorbent materials for thermal energy storage
Frazzica, Andrea
Brancato, Vincenza
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2019, 43 (12) : 6161 - 6170
[8] Thin coatings for pumping station mechanical components
Paleu, C. Cirlan
Paleu, V.
Istrate, B.
Cimpoesu, N.
Munteanu, C.
MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VII (MODTECH2019), 2019, 591
[9] Hard coatings for mechanical applications
Bertran, E
Pino, FJ
Viera, G
Andújar, JL
VACUUM, 2002, 64 (3-4) : 181 - 190
[10] Mechanical properties and thermal stabilities of multilayered AlCrBN/ AlTiSiN hard coatings
Chang, Yin-Yu
Tsai, Tsung-Hung
Chang, Chung-En
Feng, He-Qian
Yang, Ming-Xun
Stueber, Michael
Ulrich, Sven
SURFACE & COATINGS TECHNOLOGY, 2025, 498

← 1 2 3 4 5 →