Optimization of supercritical carbon dioxide recompression Brayton cycle considering anti-condensation design of centrifugal compressor

被引:24
|
作者
Li, Hao [1 ]
Ju, Yaping [1 ]
Zhang, Chuhua [1 ,2 ]
机构
[1] Xi An Jiao Tong Univ, Sch Energy & Power Engn, Dept Fluid Machinery & Engn, Xian, Shaanxi, Peoples R China
[2] Xi An Jiao Tong Univ, State Key Lab Strength & Vibrat Mech Struct, Xian, Shaanxi, Peoples R China
关键词
Supercritical carbon dioxide cycle; Anti-condensation; Thermodynamic optimization; Centrifugal compressor design; Two-zone model; Real gas; MODELS;
D O I
10.1016/j.enconman.2022.115207
中图分类号
O414.1 [热力学];
学科分类号
摘要
Supercritical carbon dioxide Brayton cycle has the advantages of high-efficiency and compactness, and is one of the most promising propulsion and power system options in shipboard application. The high-efficiency design of supercritical carbon dioxide Brayton cycle requires the compressor to operate near the critical point of carbon dioxide where the carbon dioxide changes dramatically in thermophysical properties resulting in inaccurate performance prediction for compressor and condensation tends to occur especially at the inlet of compressor impeller. So far, most of the studies on supercritical carbon dioxide cycle optimization have taken thermal efficiency and exergy performance into account while the anti-condensation performance is rarely considered. In this context, a design optimization strategy is proposed for supercritical carbon dioxide Brayton cycle, in which both the thermal efficiency and condensation margin are considered as objective functions in an attempt to improve the performance and anti-condensation. In addition, an aerodynamic design method is developed for supercritical carbon dioxide centrifugal compressor by using real gas two-zone model to alleviate the reliance on model empiricisms. The proposed strategy and the developed method are validated and then applied to a 50 MW shipboard supercritical carbon dioxide Brayton recompression cycle optimization and the main compressor design. The analysis results show that condensation margin and cycle thermal efficiency are conflictive with each other. The higher temperature and lower pressure at the compressor inlet can improve cycle anti-condensation while the opposite is true for the cycle thermal efficiency. As the condensation margin is 0.1, the thermal efficiency of optimized cycle is 48.16%. The computational fluid dynamics simulations confirm that the designed main compressor meets the anti-condensation requirements as condensation margin is above 0.1. This work is of certain significance to promote the application of supercritical carbon dioxide cycle in shipboard usage.
引用
收藏
页数:17
相关论文
共 50 条
  • [1] Performance Analysis and Optimization Design Method of Supercritical Carbon Dioxide Recompression Brayton Cycle
    Yao L.-C.
    Zou Z.-P.
    Fu C.
    Liu H.-X.
    [J]. Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (03):
  • [2] Multi-objective optimization of supercritical carbon dioxide recompression Brayton cycle considering printed circuit recuperator design
    Rao, Zhenghua
    Xue, Tianchen
    Huang, Kaixin
    Liao, Shengming
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2019, 201
  • [3] Experimental Study on Centrifugal Compressor of Closed Supercritical Carbon Dioxide Brayton Cycle
    Yang K.
    Chen L.
    Qin Z.
    Wang L.
    Dong K.
    Zhou Z.
    Lin Z.
    [J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2023, 43 (11): : 4190 - 4197
  • [4] Global parameter optimization and criterion formula of supercritical carbon dioxide Brayton cycle with recompression
    Cheng, Wen-Long
    Huang, Wen-Xu
    Nian, Yong-Le
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2017, 150 : 669 - 677
  • [5] Design optimization and performance analysis of a supercritical carbon dioxide recompression Brayton cycle based on the detailed models of the cycle components
    Saeed, Muhammad
    Khatoon, Saboora
    Kim, Man-Hoe
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2019, 196 : 242 - 260
  • [6] Design Considerations for Supercritical Carbon Dioxide Brayton Cycles With Recompression
    Dyreby, John
    Klein, Sanford
    Nellis, Gregory
    Reindl, Douglas
    [J]. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2014, 136 (10):
  • [7] Advanced exergoeconomic evaluation on supercritical carbon dioxide recompression Brayton cycle
    Liu, Zhan
    Liu, Zihui
    Cao, Xing
    Luo, Tao
    Yang, Xiaohu
    [J]. JOURNAL OF CLEANER PRODUCTION, 2020, 256
  • [8] Thermoeconomic Analysis and Optimization of a New Combined Supercritical Carbon Dioxide Recompression Brayton/Kalina Cycle
    Mahmoudi, S. Mohammad S.
    Akbari, Ata D.
    Rosen, Marc A.
    [J]. SUSTAINABILITY, 2016, 8 (10)
  • [9] Optimal design of microtube recuperators for an indirect supercritical carbon dioxide recompression closed Brayton cycle
    Jiang, Yuan
    Liese, Eric
    Zitney, Stephen E.
    Bhattacharyya, Debangsu
    [J]. APPLIED ENERGY, 2018, 216 : 634 - 648
  • [10] One-dimensional optimisation design and off-design operation strategy of centrifugal compressor for supercritical carbon dioxide Brayton cycle
    Du, Yadong
    Yang, Ce
    Wang, Haimei
    Hu, Chenxing
    [J]. APPLIED THERMAL ENGINEERING, 2021, 196