New noise rejection techniques on pulse-by-pulse basis for on-line partial discharge measurement of turbine generators - Response

On-line partial discharge tests for turbine generators are useful for recognizing abnormal or deteriorated stator winding insulation without a machine outage. One problem related to such a test is additional installation of sensors. We propose that wires of a resistance temperature detector (RTD) embedded in a stator slot are applied as a partial discharge sensor in the form of an RF coupler. The other problem is electrical noise that is a pulse similar to partial discharge in frequency characteristic and has higher amplitude than partial discharge. The sensors in two steam turbine generators showed enough sensitivity and broad frequency bandwidth to facilitate the elimination of noise from the partial discharge measurement. Two new techniques of noise rejection on pulse-by-pulse basis are investigated with the multiple sensors. One is founded on the correlation between pulse height in two frequency bands. The other is based on the correlation between pulse height from the two partial discharge sensors. It was found that each noise rejection technique was successful in a trial testing. © 1996 IEEE.