Effect of Air-Liquid Homogeneous Mixture on the Linear Dynamic Characteristics of a Hydrostatic Journal Bearing

被引:1
|
作者
Voitus, Anthony [1 ]
Arghir, Mihai [2 ]
Hassini, Mohamed-Amine [1 ]
机构
[1] Elect France, R&D, F-91477 Palaiseau, France
[2] Poitiers Univ, UPR CNRS 3346, Pprime Inst, F-86000 Poitiers, France
关键词
hydrostatic bearing; inertial effects; mixture flow; dynamic coefficients; FLOW;
D O I
10.1115/1.4063523
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Water lubricated hydrostatic journal bearings are widely used to support radial load of pumps in nuclear power plants. In some situations, these pumps may be required to operate with a mixture of water and air. This compressible air-water mixture will alter the dynamic characteristics of the hydrostatic journal bearings and can have a significant impact on the vibration behavior of the entire pump shaft line. This work is a parametrical investigation of the rotordynamic characteristics of these bearings relative to the volume fraction of the ingested air. The compressibility, the density, and the viscosity of the air-water mixture depend on this volume fraction. In order to evaluate this influence, a homogeneous air-liquid mixture model were developed. Moreover, for low viscosity lubricants, inertia effects can also have an important impact on bearing rotordynamic coefficients. Therefore, the flow is modeled first with the Reynolds equation and then with the bulk flow system of equations to evaluate this impact. The results show the variation of the direct and cross-coupling stiffness and of the direct damping with the evolution of inertial effects and of the level of air contamination.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] EFFECT OF AIR-LIQUID HOMOGENEOUS MIXTURE ON THE LINEAR DYNAMIC CHARACTERISTICS OF A HYDROSTATIC JOURNAL BEARING
    Voitus, Anthony
    Arghir, Mihai
    Hassini, Mohamed-Amine
    PROCEEDINGS OF ASME TURBO EXPO 2023: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2023, VOL 11A, 2023,
  • [2] DYNAMIC CHARACTERISTICS OF A HYDROSTATIC JOURNAL BEARING
    HO, YS
    CHEN, NNS
    WEAR, 1980, 63 (01) : 13 - 24
  • [3] Dynamic characteristics of hydrostatic fixed throttled journal bearing
    Wang, Yongqin, 1600, Central South University of Technology (45):
  • [4] Numerical analysis on dynamic characteristics of cryogenic hydrostatic journal bearing
    Yoshikawa, H
    Ota, T
    Higashino, K
    Nakai, S
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1999, 121 (04): : 879 - 885
  • [5] Numerical analysis on dynamic characteristics of cryogenic hydrostatic journal bearing
    Dept. Mach. Intell. and Syst. Eng., Tohoku University, Aramaki-Aoba 01, Aoba-ku, Sendai, 980-8579, Japan
    不详
    J. Tribol., 1600, 4 (879-885):
  • [6] Dynamic Characteristics of Hydrostatic Active Journal Bearing of Four Oil Recesses
    Yang, Xiao-Gao
    Wang, Yong-Qin
    Jiang, Gui-Yun
    Yan, Xing-Chun
    Luo, Yuan-Xin
    TRIBOLOGY TRANSACTIONS, 2015, 58 (01) : 7 - 17
  • [7] Effect of angular misalignment on the dynamic characteristics of externally pressurized air journal bearing
    Shi, Jianghai
    Cao, Hongrui
    Chen, Xuefeng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2020, 234 (02) : 205 - 228
  • [8] Effect of pressure difference across bearing on characteristics of cryogenic hydrostatic journal bearing
    Yoshikawa, Hiroyuki
    Ota, Terukazu
    Ohta, Toyohiko
    Ruike, Makoto
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1997, 63 (607): : 995 - 1001
  • [9] THE EFFECT OF AIR-WATER MIXTURE ON THE DYNAMIC RESPONSE OF A HYDRODYNAMIC JOURNAL BEARING WITH INCLINED GROOVES
    Voitus, Anthony
    Arghir, Mihai
    Hassini, Mohamed-Amine
    PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 10A, 2024,
  • [10] DYNAMIC CHARACTERISTICS OF HYDROSTATIC THRUST AIR BEARING WITH ACTIVELY CONTROLLED RESTRICTOR
    SATO, Y
    MARUTA, K
    HARADA, M
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1988, 110 (01): : 156 - 161