Crystallinity and Oscillatory Shear Rheology of Polyethylene Blends

Crystallinity and rheological behavior are significant for processing semi-crystalline polymers with fine mechanical properties. There is always an economical need to create a less expensive new material with better properties. Non-isothermal crystallization and oscillatory shear rheology of different branch-type polyethylene-polyethylene blends were investigated. Samples of high-density and low-density polyethylene (HDPE/LDPE) (20/80, 40/60, 60/40 and 80/20 weight ratios) and two types of high-density and linear low-density polyethylene (HDPE/LLDPE) (40/60 and 60/40 weight ratios) were prepared via extrusion. The materials were tested by differential scanning calorimetry (DSC) at several cooling rates (5, 10, 20, 30 and 40 degrees/min) and by oscillation rheometry (ARES G2) at low angular frequency range to prove their miscibility or immiscibility. It was found that the one-peak melting endotherm of the 80-20% HDPE-LDPE blend could indicate miscibility in the solid phase, while the other HDPE-LDPE blends with two-peak curves are partially or not miscible. In contrast, all the HDPE-LLDPE blends indicate co-crystallization, but the 40-60% HDPE-LLDPE butylene blend is probably immiscible. It was revealed that complex viscosity decreases with angular frequency: linearly for HD-LD blends and not linearly for HD-LLDPE blends. The complex viscosity shows linear behavior with composition for HD-LLDPE blends, while there is a positive-negative deviation for HD-LD blends. In the liquid phase, according to rheological measurements, the HDPE-LDPE blends are not or partially miscible, while the HDPE-LLDPE blends are probably miscible.