Finite element analysis of microscopic fracture process in titanium metal matrix composite shafts using a unit cell approach

被引:1
|
作者
Punyong, Kraisorn [1 ]
Becker, Adib A. [2 ]
Hyde, Thomas H. [2 ]
机构
[1] Prince Songkla Univ, Fac Sci & Ind Technol, Surat Thani Campus, Surat Thani 84000, Thailand
[2] Univ Nottingham, Fac Engn, Univ Pk, Nottingham, England
关键词
Titanium metal matrix composites; finite element analysis; unit cell; micromechanical simulation; shafts; FIBER; INTERFACE; STRENGTH; DAMAGE; ALLOY;
D O I
10.1177/09544062221124024
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The aim of this study is to investigate the microscopic fracture process in titanium metal matrix composites (TiMMC) shafts based on finite element (FE) analysis. A unit cell approach is used as a tool to design a representative volume element to explain the complex failure phenomenon on a microscopic level. FE mesh convergence is examined and validated with the equivalent plastic strain and contact pressure. The accuracy of the numerical modelling is verified by comparison with experimental investigations on fractured TiMMC shafts. The results show that FE modelling can successfully analyse the complicated fracture process that occurs on a microscopic scale of TiMMC shafts.
引用
收藏
页码:643 / 650
页数:8
相关论文
共 50 条
  • [1] Elasto-plastic finite element analysis of titanium metal matrix composite shafts under torsional loading
    Hyde, Thomas H.
    Punyong, Kraisorn
    Becker, Adib A.
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2015, 50 (03): : 199 - 216
  • [2] Finite element analysis of metal matrix composite blade
    Thamizh, R. Isai
    Velmurugan, R.
    Jayagandhan, R.
    AEROTECH VI - INNOVATION IN AEROSPACE ENGINEERING AND TECHNOLOGY, 2016, 152
  • [3] Fracture Analysis of Particulate Metal Matrix Composite Using X-ray Tomography and Extended Finite Element Method (XFEM)
    Yuan, Rui
    Singh, Sudhanshu S.
    Liao, Xiao
    Oswald, Jay
    Chawla, Nikhilesh
    JOURNAL OF COMPOSITES SCIENCE, 2020, 4 (02):
  • [4] Stability analysis of internally damped rotating composite shafts using a finite element formulation
    Ben Arab, Safa
    Rodrigues, Jose Dias
    Bouaziz, Slim
    Haddar, Mohamed
    COMPTES RENDUS MECANIQUE, 2018, 346 (04): : 291 - 307
  • [5] Study of Machining Process of SiCp/Al Particle Reinforced Metal Matrix Composite Using Finite Element Analysis and Experimental Verification
    Laghari, Rashid Ali
    Li, Jianguang
    Wu, Yongxiang
    MATERIALS, 2020, 13 (23) : 1 - 39
  • [6] Finite element analysis and experimental investigation in incremental sheet metal forming of composite matrix of Grade-V titanium
    Kajal, Gianender
    Tyagi, M. R.
    Kumar, Gulshan
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024,
  • [7] Thermal mismatch stresses in a metal matrix composite - A finite element analysis.
    Sharma, SC
    Krishna, M
    Koti, MS
    STATE OF THE ART IN CAST METAL MATRIX COMPOSITES IN THE NEXT MILLENIUM, 2000, : 143 - 152
  • [8] Analysis of Sheet Metal Extrusion Process Using Finite Element Method
    Zhuang X.-C.
    Xiang H.
    Zhao Z.
    International Journal of Automation and Computing, 2010, 7 (03) : 295 - 302
  • [9] Analysis of Sheet Metal Extrusion Process Using Finite Element Method
    Xin-Cun Zhuang Hua Xiang Zhen Zhao Department of Plasticity Technology
    International Journal of Automation & Computing, 2010, 7 (03) : 295 - 302
  • [10] A dynamic investigation of the burst fracture process using a combined experimental and finite element approach
    Wilcox, RK
    Allen, DJ
    Hall, RM
    Limb, D
    Barton, DC
    Dickson, RA
    EUROPEAN SPINE JOURNAL, 2004, 13 (06) : 481 - 488