Thermal performance enhancement on a box-type solar cooker using a triangular fin over a conventional cooking pot

The thermal performance of existing box-type solar cookers is limited and to improve the performance many research works reported on modification of solar cooker sub-systems i.e., cylindrical fin over the cooking pot, extra air duct, integrating with a photovoltaic panel, incorporation of heat storage materials and multiple re-flectors. This paper presents a novel study of a triangular-finned cooking pot to increase the convective heat transfer rate and solar irradiance over the cooking pot. The thermal network diagram is presented and thermal losses are measured using MATLAB. The thermal visualization is presented with the help of COMSOL Multi-physics 5.5 and uncertainty analysis of different performance parameters is completed with Engineering Equa-tion Solver (EES). The simulation results found thermal losses occur from the top, bottom and side are 4.26, 0.77 and 0.64 W/m2 respectively. The experimentally observed result indicates the cooking time is reduced from 94-95 min to 85-86 min during the boiling test of 1.5 kg water for the triangular finned cooking pot. The first figure of merit is 0.139 and the second figure of merit is 0.563 respectively for the same loading conditions. The cooking power is increased from 68.71 W to 77.06 W. The thermal efficiency is increased from 36.16 % to 40.55 %. The uncertainty analysis emphasizes the value of the performance parameter lies within an acceptable range. From thermal visualization, It is concluded that wall edges are less affected by heat flow and the correct placement of the cooking pot is necessary for uniform heating.