Modeling analysis of non-azeotropic and immiscible binary mixed vapors condensation under natural convection

A calculation model describing the condensation heat and mass transfer process of non-azeotropic im-miscible binary mixed vapors on the vertical wall under natural convection conditions was developed in this study. The model includes the two possible condensation modes of mixed vapors on the vertical wall as well as the conversion conditions between them. Cyclohexane and water were used as non-azeotropic immiscible mixtures. The reliability of the model was verified first, then the influence of vapor mass concentration and wall subcooling on the condensation mode and heat and mass transfer of the mixed vapors were analyzed. The results showed that the maximum deviation between the model results and the experimental results was less than 21%, confirming that the model was reliable. When the mixed vapors mass concentration was nearly eutectic or the wall subcooling was large, the condensation Mode B (Co-condensation) was more likely to occur than Mode A (Single condensation) due to the decrease in vapor-liquid interface temperature. The condensation mode may change from B to A as the wall length increased along the gravity direction of the condensation wall, and the condensation heat transfer coeffi-cient and mass flux decreased. The thermal resistance of the vapor and liquid phases during condensation was also calculated. In Mode A, regulation of the thermal resistance of the vapor-liquid two phases can be achieved by adjusting the vertical length of the condensation wall and the vapor mass concentration. Condensation Mode B can only be realized by adjusting the wall subcooling. The results of this work may provide a workable reference for condensation heat transfer and enhancement of non-azeotropic immiscible mixed vapors in industrial environments.& COPY; 2023 Published by Elsevier Ltd.