Three-dimensional numerical study of a local scour downstream of a submerged sluice gate using two hydro-morphodynamic models, SedFoam and FLOW-3D

被引:1
|
作者
Ghzayel, Alaa [1 ]
Beaudoin, Anthony [1 ]
机构
[1] Inst Pprime, SP2MI Teleport 2,Blvd Marie & Pierre Curie, F-86962 Futuroscope, France
来源
COMPTES RENDUS MECANIQUE | 2023年 / 351卷
关键词
scouring; confined water jet; CFD modeling; turbulence modeling; multi-phase flow model; sediment scour model; SEDIMENT TRANSPORT; 2-PHASE;
D O I
10.5802/crmeca.223
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Three-dimensional numerical simulations were performed, based on an experimental study of sediments scour process subjected to a water jet downstream of a submerged sluice gate with a rectangular opening at the bottom in a very confined channel. This experimental geometry, little studied in the literature, presents two particular phenomena in the dynamics of the scour process: a change of the dune form and a digging - refilling cycles of the scour. Two different hydro-morphodynamic models, SedFoam and FLOW-3D, were used and calibrated according to the experimental data. SedFoam is a multiphase flow model based on the open-source tool-box OpenFOAM and uses a coupling method between the fluid and particles phases in the RANS equations through the dense granular rheology, while FLOW-3D is an CFD software that uses a sediment scour model to perform sediment transport through bedload and suspended load transport equations without direct couplingwith the fluid phase. The use of these specific three-dimensional numerical models in the case of the water flow with a jet in a very confined channel has allowed to evaluate the accuracy of turbulence models used. TheRNGK-e turbulence model was used in FLOW-3Dwhile the K-omega turbulence model was used in SedFoam. The RNG K - epsilon turbulence model is more numerically stable for a finer mesh size. Based on the comparison of the three-dimensional numerical results with the experimental data, a discussion has allowed to explain the two particular phenomena in the dynamics of the scour process, a change of the dune formand a digging - refilling cycles of the scour, observed in the experimental data. It was concluded that the dune shape-shifting is due to the hydro-morphodynamic behaviour of the interaction of fluid-particles in presence of high degree of confinement while the digging - refilling phenomenon is explained by the physical mechanics behaviour of the particles phase due to gravity.
引用
收藏
页码:525 / 550
页数:26
相关论文
共 25 条
  • [1] Performance Evaluation of Different Stilling Basins Downstream of Barrage Using FLOW-3D Scour Models
    Zaffar, Muhammad Waqas
    Haasan, Ishtiaq
    Ghumman, Abdul Razzaq
    HYDROLOGY, 2023, 10 (12)
  • [2] Three-Dimensional Simulations of Subaerial Landslide-Generated Waves: Comparing OpenFOAM and FLOW-3D HYDRO Models
    Sabeti, Ramtin
    Heidarzadeh, Mohammad
    Romano, Alessandro
    Ojeda, Gabriel Barajas
    Lara, Javier L.
    PURE AND APPLIED GEOPHYSICS, 2024, 181 (04) : 1075 - 1093
  • [3] Three-Dimensional Simulations of Subaerial Landslide-Generated Waves: Comparing OpenFOAM and FLOW-3D HYDRO Models
    Ramtin Sabeti
    Mohammad Heidarzadeh
    Alessandro Romano
    Gabriel Barajas Ojeda
    Javier L. Lara
    Pure and Applied Geophysics, 2024, 181 : 1075 - 1093
  • [4] Three-dimensional numerical simulation of flow in trapezoidal cutthroat flumes based on FLOW-3D
    Danjie RAN
    Wene WANG
    Xiaotao HU
    FrontiersofAgriculturalScienceandEngineering, 2018, 5 (02) : 168 - 176
  • [5] Three-dimensional numerical simulation of flow in trapezoidal cutthroat flumes based on FLOW-3D
    Ran, Danjie
    Wang, Wene
    Hu, Xiaotao
    FRONTIERS OF AGRICULTURAL SCIENCE AND ENGINEERING, 2018, 5 (02) : 168 - 176
  • [6] Sacrificial Piles as Scour Countermeasures in River Bridges A Numerical Study using FLOW-3D
    Nazari-Sharabian, Mohammad
    Nazari-Sharabian, Aliasghar
    Karakouzian, Moses
    Karami, Mehrdad
    CIVIL ENGINEERING JOURNAL-TEHRAN, 2020, 6 (06): : 1091 - 1103
  • [7] Numerical simulation of local scour around the pier with and without airfoil collar (AFC) using FLOW-3D
    Gupta, Lav Kumar
    Pandey, Manish
    Raj, P. Anand
    ENVIRONMENTAL FLUID MECHANICS, 2024, 24 (04) : 631 - 649
  • [8] A study of three-dimensional (3-D) printed prosthetic upper limb models in local context
    Neethan, R.
    Nidershan, S.
    Mugilgeethan, V
    Tharsika, T.
    Anburuvel, A.
    MATERIALS TODAY-PROCEEDINGS, 2020, 23 : 8 - 11
  • [9] Numerical study of an ion-exchanged glass waveguide using both two-dimensional and three-dimensional models
    Wang, Pengfei
    Semenova, Yuliya
    Zheng, Jie
    Wu, Qiang
    Hatta, Agus Muhamad
    Farrell, Gerald
    OPTICS AND LASER TECHNOLOGY, 2011, 43 (04): : 882 - 888
  • [10] Numerical Study of Three-Dimensional Models of Single- and Two-Phase Nanofluid Flow through Corrugated Channels
    Abugnah, Elhadi Kh
    Salim, Wan Saiful-Islam Wan
    Elfaghi, Abdulhafid M. A.
    Al-Alimi, Sami
    Saif, Yazid
    Zhou, Wenbin
    PROCESSES, 2024, 12 (05)