Effects of gripper location and blank geometry on the thermoforming of a carbon-fiber woven-fabric/polyphenylene sulfide composite sheet

The effects of gripper location and blank geometry on the thermoforming of a pre-consolidated carbon-fiber woven-fabric/polyphenylene sulfide (PPS) thermoplastic composite sheet (deformed into a U-beam geometry) are investigated both experimentally and numerically. The thermoforming experiments and simulations are performed at constant tool (160(o)C) and sheet (315(o)C) temperatures by using four thermoplastic composite blanks, which are different in geometry and inserted into the blank holder using gripping springs. Thermocouples are inserted on the composite sheet and forming molds in order to monitor the temperature variations during thermoforming. Thermoforming process is simulated in Ls-Dyna; the composite sheet is modeled using the Anisotropic Hyperelastic Material Model (MAT_249). An optimum punch speed and a spring constant are initially determined through numerical simulations. Afterward, the numerical thermoforming processes of four different blanks are implemented separately. Results reveal that the simulations show good agreements with the experiments in terms of defects formation and the maximum shear angles between the fiber directions on the final thermoformed U-beam geometry. When the blank is attached with eight springs from the lugs to the blank holder, the deformation and distortion of the net edge of the sheet are avoided, resulting in significant reductions in the extent of defect formation.