Dissolved Methane Recovery and Trace Contaminant Fate Following Mainstream Anaerobic Treatment of Municipal Wastewater

Anaerobic treatment of municipal wastewater with the staged anaerobic fluidized bed membrane bioreactor (SAF-MBR) shows promise to transform secondary wastewater treatment into an energy-positive process. However, the dissolved methane in SAF-MBR effluent needs to be recovered to reach net energy positive. To recover this methane for energy generation, an air stripping system was constructed downstream of a pilot-scale SAFMBR facility and operated for over 80 days. The process removed 98% of effluent dissolved methane, and with the addition of intermittent disinfection recovered an average of 90% of the dissolved methane. The exit gas from air stripping comprised 1.5-2.5% methane and could be utilized by blending with biogas produced from primary solids digestion and the SAF-MBR in an on-site combustion process. The direct energy costs for air stripping methane are <1% of the energy recoverable from the dissolved methane, not accounting for siloxane or sulfide scrubbing. Only siloxanes were observed at levels impacting combustion in this study, with 1.6 mg Si/m3 present in the blended biogas and air stripping mixture. The fate of a subset of trace organic contaminants was examined across the air stripping unit to check for aerobic degradation by methanotrophs or other opportunistic aerobes. Only 1,4dioxane and benzotriazole showed statistically significant removal among 17 compounds screened, with 0.53 +/- 0.13 and 0.34 +/- 0.15 fraction removal, respectively. Our results indicate that air stripping is an energy efficient and robust technology for dissolved methane removal and onsite utilization for heat and electricity generation from anaerobic treatment of municipal wastewater.